Bedienungsanleitung Parkside IAN 85053 PESG 120 A1 (Seite 46 von 58) (Deutsch, Englisch, Holländisch, Französisch)

745090

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

- 46 -

Constricted and wet areas

Caution!

When working in constricted, wet or hot areas,

use insulating supports and intermediate layers

as well as slip-on gloves made of leather or other

non-conductive materials to insulate your body

against the ﬂ oor, walls, conductive parts of the

equipment and the like.

If you use small welding transformers for wel-

ding in places with an increase electrical risk,

for example in constricted areas with conductive

walls, (tanks, pipes, etc.), in wet areas (which

make work clothes wet) and in hot areas (pers-

piration on work clothes), the output voltage of

the welding set when idling must not exceed 42

V (effective value). Therefore, the equipment may

not be used for these purposes because its output

voltage is higher than this.

Safety clothing

Caution!

•

While working, the welder must protect his

entire body from radiation and burns by wea-

ring suitable clothing and a face guard.

•

Slip-on gloves made of a suitable material

(leather) must be worn on both hands. They

must be in perfect condition.

•

Suitable aprons must be worn to protect

clothing from sparks and burns. A safety suit

and, if necessary, head protection must be

worn if required by the type of work in questi-

on, e.g. overhead welding.

•

The safety clothing used as well as all acces-

sories must comply with the directive on “per-

sonal safety equipment”.

Protection from radiation and burns

Caution!

•

Provide information about the risk to eyes at

the working site in the form of a poster with

the wording “Caution – do not look at the

flames”. Workplaces are to be screened off

wherever possible so that personnel in the

vicinity are protected. Unauthorized persons

are to be kept away from the welding work.

•

The walls in the immediate vicinity of stationa-

ry workplaces may not have a light color or a

sheen. Windows up to head height are to be

protected against radiation passing through

them or reflecting off them, for example by

coating them with a suitable paint.

3. Layout and items supplied

3.1 Layout (Fig. 1)

1. Carry handle

2. Welding current scale

3. ON/OFF switch

4. Earth terminal

5. Electrode holder

6. Adjustment wheel for welding current

7. Warning lamp for overheating

8. Welding screen

9. Wire brush / slag hammer

k Safety glass frame

l Welding glass

m Safety glass

n Safety glass retaining bushes

o Nuts for handle

p Screws for handle

q Safety glass retaining pins

r Handle

s Welding screen frame

3.2 Items supplied

•

Open the packaging and take out the equip-

ment with care.

•

Remove the packaging material and any

packaging and/or transportation braces (if

available).

•

Check to see if all items are supplied.

•

Inspect the equipment and accessories for

transport damage.

•

If possible, please keep the packaging until

the end of the guarantee period.

Anl_1549051.indb 46Anl_1549051.indb 46 17.10.12 16:1217.10.12 16:12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 85053 PESG 120 A1 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info