Bedienungsanleitung Parkside IAN 89570 PDEXS 150 A1 (Seite 44 von 51) (Französisch)

745094

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

44 GB

Safety instructions

maintenance from all dangerous substances

which (due to work processes) may have accu-

mulated on the appliance. Avoid all skin con-

tact with these substances.

Note: If your skin comes into contact with

dangerous dusts, severe dermatitis may result.

If dust is produced or dispersed during the

maintenance work, it can be inhaled.

General safety rules

The operator always has to assess the particu-

lar risks involved in the respective applications

and has to carry out the connected safety

measures.

Multiple hazards. The safety instructions

must be read and understood before rigging,

operating, repairing, maintaining and exchang-

ing accessories on the sander and before

working near the machine. Failure to observe

this may result in severe physical injuries.

The sander or polisher should only be set up,

adjusted or used by qualified and trained

operators.

This sander or polisher must not be

modified. Modifications may reduce the

effectiveness of safety measures and increase

operator risks.

Do not allow these safety instructions

to get lost - hand them to the operator.

Never used damaged discs for the

sander or polisher.

The machines have to be regularly

inspected to check that the machines

are marked with the rated values and

markings clearly given in this docu-

ment. If necessary the employer/operator

has to contact the manufacturer to receive

replacement labels.

Risks due to projected parts

If the work-piece, one of the accessories or the

tool itself breaks, parts may be projected at

great speed.

When operating the sander or the

polisher, always wear impact resistant

eye protection. The level of required pro-

tection required should be assessed individually

for each application.

When working overhead, a safety

helmet must be worn.

In this case, the risk to other people must also

be assessed.

It must be ensured that the work-piece

is properly secured.

Hazards from entanglement

There is the danger of suffocation,

scalping or suffering cuts, when loosely

fitting clothing, jewellery, hair or

gloves are not kept away from the

machine and its accessories.

Operating hazards

When using the machine, the operator‘s

hands may be at risk, for example

from cutting, abrasion and heat. Wear

suitable gloves to protect hands.

The operator and maintenance personnel must

be physically capable of managing the size,

weight and power of the machine.

Hold the machine correctly: be prepared

to counteract typical or sudden movements –

keep both hands ready.

Be sure your body is well balanced

and that you maintain a solid grip.

In the event of power failure release the start

or stop control.

Only use lubricants recommended by the

manufacturer (pneumatic oil).

To oil the appliance manually, remove the air

hose and fill 1 to 2 drops of a suitable pneu-

matic engine oil into the hose pipe end of the

machine.

Wear suitable protective

gloves. Otherwise there is the

danger of injuries due to cuts!

89570_par_Druckluft_Exzenterschleifer_content_LB2.indd 44 29.05.13 17:33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 89570 PDEXS 150 A1 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 89570 PDEXS 150 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info