Bedienungsanleitung Parkside IAN 90851 PSDS 240 A1 (Seite 48 von 58) (Französisch, Italienisch)

745133

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

- 48 -

14. Disconnect tools

– When not in use, before servicing, and

when changing accessories such as blades,

bits and cutters.

15. Remove adjusting keys and wrenches

– Form the habit of checking to see that keys

and adjusting wrenches are removed from

tool before turning it on.

16. Avoid unintentional starting

– Don‘t carry plugged-in tool with ﬁ nger on

switch. Be sure switch is off when plugging in.

17. Outdoor use extension cords

– When tool is used outdoors, use only exten-

sion cords intended for use outdoors and so

marked.

18. Stay alert

– Watch what you are doing. Use common

sense. Do not operate tool when you are ti-

red.

19. Check damaged parts

– Before further use of the tool, a guard or

other part that is damaged should be care-

fully checked to determine that it will operate

properly and perform its intended function.

Check for alignment of moving parts, binding

of moving parts, breakage of parts, mounting,

and any other conditions that may affect its

operation. A guard or other part that is dama-

ged should be properly repaired or replaced

by an authorized service center unless other-

wise indicated elsewhere in this instructions

manual. Have defective switches replaced by

an authorized service center. Do not use tool

if switch does not turn it on and off.

20. Warning

– The use of any other accessory or attach-

ment other than recommended it this ope-

rating instruction or the Einhell catalog may

present a risk of personal injury.

21 . Have your tool repared by an expert

– This electric appliance is in accordance with

the relevant safety rules repairing of electric

appliances may be carried out only by ex-

perts otherwise it may cause considerable

danger for the user.

22. Connect the dust extraction device

Wherever there are facilities for ﬁ tting a dust

extraction system, make sure it is connected

and used.

General safety regulations and accident

prevention

It is essential that you read the safety regulations

and operating instructions in their entirety and

follow the information contained therein in order

to eliminate the possibility of an accident or po-

tentially dangerous situation from occurring while

working with the machine.

•

Always check the device, the mains cable

and the plug before using the high-pressure

cleaner. Only operate the tool when it is in

good working order and is not damaged in

any way. Damaged parts have to be repla-

ced immediately by a qualified electrician.

•

Always pull the power plug out of the socket

outlet before doing any work on the machine,

before changing the grinding tool and whe-

never the machine is not being used.

•

To prevent damage to the power cable, al-

ways lead the power cable away from the

rear of the machine.

•

Keep the tools in a safe place and out of the

reach of children.

Use on materials containing asbestos is

prohibited.

Note the corresponding accident prevention re-

gulation (e.g. VBG 119 in Germany) issued by the

professional associations in your country.

•

Use only original replacement parts.

•

Repairs may only be carried out by a quali-

fied electrician.

•

The machine may exceed 85 db (A) at the

workplace. The operator will require noise

protection measures and ear muffs if this

is the case. The noise of this electric tool is

measured in accordance with IEC 59 CO 11,

IEC 704, DIN 45635 part 21, NFS 31-031

(84/537/EEC).

•

Ensure that you maintain a steady foothold.

Avoid abnormal working postures.

•

Do not expose your electric tool to rain. Ne-

ver use electric tools in damp or wet locations

Anl_4466148.indb 48Anl_4466148.indb 48 22.04.13 13:4022.04.13 13:40

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 90851 PSDS 240 A1 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 90851 PSDS 240 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info