Bedienungsanleitung Parkside IAN 90851 PSDS 240 A1 (Seite 49 von 58) (Französisch, Italienisch)

745133

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

- 49 -

or near flammable liquids or gases.

•

Protect the mains cable from becoming dama-

ged by oil, solvents and sharp edges.

•

Keep your work area tidy.

•

Make sure that the switch is turned off when

connecting the tool to the power supply.

•

Wear suitable work clothes. Never wear loo-

se fitting clothes and jewelry. Wear a hair net

if you have long hair.

•

For your own safety, use only accessories and

auxiliary equipment from the manufacturer of

your electric tool.

•

Always wear safety goggles, protective

gloves and ear-muffs while carrying out grin-

ding, brushing and cutting jobs.

•

Check that the rotating speed shown on the

wheel is equal to or higher than the rated

speed of rotation for the grinder.

•

Make sure that the grinding wheel is of the

correct size for the grinder.

•

Grinding wheels must be handled and

stored with care in accordance with the

manufacturer‘s instructions. Examine the grin-

ding wheel each time before using it. Never

use grinding wheels which have parts broken

off or are cracked or in any other way da-

maged.

•

Be sure to use only grinding wheels and bru-

shes which are marked with a speed at least

as high as the speed indicated on the rating

plate of the electric tool.

•

Check that grinding wheels are fitted in ac-

cordance with the manufacturer‘s instructions.

•

Make sure that intermediate layers are used

if they are supplied with and required for the

grinding wheel.

•

Make sure that the grinding disk is correctly

fitted and secured before you start to use the

tool. Allow the machine to run without load

and in a safe position for 5 minutes. Stop the

machine immediately if severe vibrations arise

or any other defects are noticed. If this should

be the case, examine the machine to find the

cause.

•

The electric tool must never be used without

the guard hood supplied with it.

•

Never use separate reducer sleeves or adap-

ters to make grinding wheels with larger holes

fit on the machine.

•

Take precautions to ensure that flying sparks

do not cause any danger, e.g. that they do

not hit anyone or cause inflammable substan-

ces to ignite.

•

Always wear safety goggles and ear-muffs;

use other personal safety equipment such as

gloves, an apron and a helmet if necessary.

•

The workpiece becomes hot during grinding.

Important! Risk of burns!

Let the workpiece cool down. The material may

become glowing hot during the grinding. On

longer jobs, allow the workpiece to cool down

occasionally.

•

Do not use coolant or the like.

Special safety information

1. Before you use the grinder, carry out a ring

test on the grinding wheels (perfect grinding

wheels emit a clear tone when hit lightly with

e.g. a plastic hammer). This also applies when

you ﬁ t new grinding wheels (damage in tran-

sit). It is essential to subject the machine to an

unloaded test run of at least 5 minutes. Leave

the danger zone while the test is in progress.

2. Use only grinding wheels which are marked

with details of the manufacturer, the type of

bonding agent used, dimensions and the per-

missible RPM.

3. Grinding wheels must be stored in a dry

place, ideally at a constant temperature.

4. Use only the clamping ﬂ anges supplied with

the equipment to mount the grinding wheels.

5. Use only clamping ﬂ anges of identical size

and identical shape to mount the grinding

wheels. The intermediate layers between the

clamping ﬂ ange and the grinding wheel must

be comprised of elastic materials, e.g. rubber,

soft cardboard, etc.

6. Never enlarge a grinding wheel‘s mounting

hole by subsequent drilling.

7. The workpiece supports and the top adjus-

table safety guards must always be moved as

close as possible to the grinding wheel (max.

2 mm clearance).

Anl_4466148.indb 49Anl_4466148.indb 49 22.04.13 13:4022.04.13 13:40

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 90851 PSDS 240 A1 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 90851 PSDS 240 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info