Preparing for use / Maintenance and cleaning / Disposal / Information
Setting the riving knife: (see Fig. F)
Set the distance between the riving knife
16
and
the tips of the saw blade teeth to a maximum of 5
mm, and the distance between the tip of the riving
blade and the lowest point of the saw blade to a
maximum of 5 mm.
The distances to be set are illustrated in Fig. F.
Q
Tips and tricks
j Use the appropriate marking on the base plate
for the desired cutting angle (the marking can
be found behind the wing screw for the guide
fence
10
): Right-angled cut = marking 0°,
45°- cut = marking 45°.
j Breaking out of the cut edges of delicate sur-
faces, e.g. coated chipboard or doors, can be
avoided by applying masking tape in advance
along the cutting line. This has the additional
advantage that masking tape shows up the cut-
ting line better than a smooth surface. An even
more effective way of stopping the cut edges
from being broken out is to clamp a thin piece
of wood along the cutting line, which is then
also sawn through.
Q
Maintenance and cleaning
WARNING!
Always pull the mains plug out
of the socket before doing any work on the device.
j Clean the device after you have finished using it.
j Use a cloth to clean the outside of the device -
never use petrol, solvents or cleaners.
Q
Disposal
The packaging is wholly composed of
environmentally-friendly materials that
can be disposed of at a local recycling
centre.
Do not dispose of electrical
power tools with the household
rubbish!
In accordance with European Directive 2002 / 96 / EC
(covering waste electrical and electronic equipment)
and its transposition into national legislation, worn
out electrical power tools must be collected separate-
ly and taken for environmentally compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
Do not dispose of rechargeable
batteries with your household
refuse!
Disposal of batteries
Batteries must be recycled in accordance with
Directive 91 / 157 / EEC and must not be disposed
of with household refuse. Battery users are obliged
by law to take all rechargeable and single-use bat-
teries to a collection point operated by a public
authority or a retailer.
Q
Information
Q
Service
J
WARNING!
Have your device
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
J
WARNING!
If the plug or lead
needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to use.
Q
Warranty
This appliance is guaranteed for 3 years
from the date of purchase. It has been care-
fully produced and meti-culously checked
before delivery. Please keep your receipt
as proof of purchase. Contact your service
centre by telephone in case of questions
pertaining to the warranty. Your goods can
