Bedienungsanleitung Parkside MPKZ 2000 A1 - IAN 315340 (Seite 17 von 68) (Deutsch, Englisch, Holländisch, Französisch)

706349

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

12 GB/IE/NI

Damaged electrical connection cable.

The insulation on electrical connection cables is often dam-

aged.

This may have the following causes:

• Passage points, where connection cables are passed

through windows or doors.

• Kinks where the connection cable has been improperly fas-

tened or routed.

• Places where the connection cables have been cut due to

being driven over.

• Insulation damage due to being ripped out of the wall out-

let.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not be used

and are life-threatening due to the insulation damage.

Check the electrical connection cables for damage regularly.

Make sure that the connection cable does not hang on the

power network during the inspection.

Electrical connection cables must comply with the applicable

VDE and DIN provisions. Only use connection cables with the

marking „H05VV-F“.

The printing of the type designation on the connection cable

is mandatory.

AC motor:

The mains voltage must be 220 - 240 V

• Extension cables up to 25 m long must have a cross-section

of 1.5 mm

Connections and repairs of electrical equipment may only be

carried out by an electrician.

Please provide the following information in the event of any

enquiries:

• Type of current for the motor

• Machine data - type plate

13. Disposal and recycling

The equipment is supplied in packaging to prevent it from be-

ing damaged in transit. The raw materials in this packaging

can be reused or recycled. The equipment and its accesso-

ries are made of various types of material, such as metal and

plastic. Defective components must be disposed of as special

waste. Ask your dealer or your local council.

The packaging is wholly composed of environment-

ally-friendly materials that can be disposed of at a

local recycling centre.

Contact your local refuse disposal authority for

more details of how to dispose of your worn-out

electrical devices.

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must not be

disposed of together with domestic waste in

compliance with the Directive (2012/19/EU)

pertaining to waste electrical and electronic

equipment (WEEE). This product must be disposed of at a

designated collection point. This can occur, for example, by

handing it in at an authorised collecting point for the

recycling of waste electrical and electronic equipment.

Improper handling of waste equipment may have negative

consequences for the environment and human health due to

potentially hazardous substances that are often contained in

electrical and electronic equipment. By properly disposing

of this product, you are also contributing to the eﬀective use

of natural resources. You can obtain information on

collection points for waste equipment from your municipal

administration, public waste disposal authority, an author-

ised body for the disposal of waste electrical and electronic

equipment or your waste disposal company.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside MPKZ 2000 A1 - IAN 315340 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info