Bedienungsanleitung Parkside PBM 42 A1 - IAN 373349 (Seite 29 von 200) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Polnisch)

786093

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

GB IE

smoke while refuelling the device;

- Petrol has to be added before start-

ing the engine. The fuel tank cap

must not be opened and petrol must

not be added while the engine is

running or the device is still hot.

- If there was an accidental petrol

spill, do not attempt to start the

engine. Instead, remove the device

from the petrol contaminated sur-

face. Do not try to ignite the engine

until all petrol vapours have evapo-

rated;

- If the fuel tank or other tank caps are

damaged, replace them for safety

reasons.

• Replace defective mufﬂ ers.

• Before use, always perform a visual

inspection to check whether the cutting

tools, fastening bolts and the entire

cutting unit are worn out or damaged.

Worn or damaged tools and bolts must

only be replaced as a set to prevent

imbalance.

• Take care when using devices with

several cutting tools as the movement

of one blade can lead to rotation of the

other blades.

• Use replacement and accessory parts

supplied or recommended by the

manufacturer only. Using externally

produced parts can cause injury, and

void any warranty claims.

Operation:

• Never let the internal combustion

engine run in a conﬁ ned space, as

dangerous carbon monoxide can ac-

cumulate.

• Use the machine only in daylight or

with good artiﬁ cial lighting. Working

in areas without lighting can result in

accidents.

• If possible, do not use the device on

wet grass.

• Always ensure secure positioning, par-

ticularly on hillsides, landﬁ lls, ditches

or dykes. This will help you to have bet-

ter control of the device in unexpected

situations.

- Always move crosswise across

slopes, never up or down.

- Take special care when changing the

direction of travel on slopes.

- Do not mow on overly steep slopes

(max. 10°).

• Only operate the device at walking

speed.

• Take special care when turning the de-

vice around or pulling it towards you.

• Stop the cutting tool when the device

has to be tipped for transport over

other areas than grass and when the

device is moved from and to the area

to be mowed.

• Never use the device with damaged

protective equipment or protective

grating or without installed protective

equipment, e.g. impact protection

and/or grass collection equipment. This

ensures the safety of the device is not

adversely affected.

• Do not change the controller settings of

the motor and do not overturn it. This

could damage the device.

• Before starting the engine, release all

cutting tools and drives.

• Turn on the device with care in accord-

ance with the manufacturer instructions.

Ensure your feet are at a sufﬁ cient dis-

tance from the cutting tool. There is a

risk of injury.

• When starting or turning the engine

on, the device must not be tilted, unless

it is required to lift the device in the pro-

cess. In this event, tilt the device only

as far as absolutely necessary and lift it

only on the side facing away from the

user.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PBM 42 A1 - IAN 373349 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info