Bedienungsanleitung Parkside PBM 42 A1 - IAN 373349 (Seite 30 von 200) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Polnisch)

786093

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

GB IE

• Do not start the motor when standing in

front of the ejector opening.

• Switch the engine on as directed and

only if your feet are a safe distance

away from the cutting tools.

• Never place your hands or feet on

or below rotating parts. Always keep

away from the ejector opening. A

moment of inattention when using the

device can result in serious injuries.

• Never lift or carry the device when the

engine is running.

• Shut off the engine, disconnect the

spark plug connector, remove the igni-

tion key if present, and make sure that

all movable parts have stopped mov-

ing:

- before removing obstructions, or

loosening blockages from the ejector

opening;

- before checking the device, cleaning

it or performing maintenance work

on it;

- when a foreign object has been hit.

Check for damages to the device

and perform any required repairs

before starting and working with the

machine again;

- if the device starts to vibrate abnor-

mally strong, an immediate inspec-

tion is required.

- when leaving the device;

- before refuelling.

• Never leave the device unattended at

the workplace.

• Do not work with a damaged or incom-

plete device or one which has been

converted without the permission of the

manufacturer. Using the device for any-

thing other than its intended use can

lead to dangerous situations.

• Do not work with the device if there

is a risk of lightning strike. Danger of

electric shock.

The throttle valve must be closed when

the motor comes to a stop. If the engine

has a petrol shut-off valve, it must be

closed after mowing.

Maintenance and storage:

• Make sure that all nuts, bolts and

screws are properly tightened, and that

the device is in safe working order.

Many accidents are caused by poorly

maintained appliances.

• Never store the device with fuel in its

petrol tank inside a building, where

fuel vapours may be coming in contact

with ﬁ re or sparks.

• Give the engine time to cool off before

you store the device in an enclosed

space. Possible ﬁ re hazard.

• To avoid risk of ﬁ re, keep engine, ex-

haust and the area around the petrol

tank free of grass, leaves or leaking

grease (engine oil).

• Check the grass collection unit regu-

larly for wear or loss of function.

• Replace worn or damaged parts for

safety reasons. Replace defective muf-

ﬂ ers.

• If you need to drain the petrol tank,

you must do so outside.

• Treat your device with care. Keep the

tools sharpened and clean in order to

be able to work better and safer. Fol-

low the maintenance instructions.

• Do not try to repair the device yourself,

unless you have professional training.

All work not speciﬁ ed in this instruction

manual may only be carried out by cus-

tomer service centres authorised by us.

• Store the device in a dry place and

out of reach of children. Devices can

be dangerous if operated by inexperi-

enced persons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PBM 42 A1 - IAN 373349 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info