Bedienungsanleitung Parkside PDEXS 150 A1 - IAN 96905 (Seite 9 von 81) (Dänisch, Französisch, Schwedisch, Finnisch)

595405

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

9 GB/IE

Safety instructions

Wear protective glasses!

Wear suitable clothing!

Inspect the sanding disc before every use. Do

not use if it is torn, broken or has been dropped.

Avoid direct contact with the moving sanding

disc to prevent crushing or pinching the hands

or other body parts. Wear suitable gloves to

protect the hands.

Never use the machine without abrasives.

There is a risk of electrostatic discharge when

using the machine on plastic and other non-

conductive materials.

Dust and vapours created by grinding and

sanding can create a potentially explosive at-

mosphere. Always use a dust extraction or

suppression system suitable for the material

being worked on.

Hazards due to repetitive

motions

When using the sander or polisher for

work related tasks, the operator may

experience uncomfortable sensations

in hands, arms and the area of the neck

and shoulder or in other parts of the

body.

The operator should maintain a com

fort-

able position whilst using this sander

or polisher, thereby ensuring a secure

grip and avoiding awkward positions

or positions making it difficult to main-

tain balance. The operator should change his

posture when working for longer, to help avoid

discomfort and fatigue.

If the operator experiences symptoms

such as persistently or repeatedly feel-

ing unwell, discomfort, palpitations,

pain, tingling, numbness, a burning

sensation or stiffness, these warning

signs should not be ignored. The opera-

tor should report these to the employer and

consult a qualified healthcare professional.

Risks associated with

accessories

Unplug the sander or polisher before you change

tools or accessories.

Only use the size and types of accessories and

consumables recommended by the manufac-

turer of the sander or polisher.

Please avoid direct contact with the machine

tool during and after use, as it could have

heated up or have sharp edges.

Only use tools and accessories for the sander

and polisher that are designated for use by

the manufacturer of the sander and polisher.

Do not use cutting discs and machines for cutting.

It must be checked that the maximum operating

speed of the machine tool (flap discs, sanding

belts, fleece discs) is higher than the nominal

speed of the machine.

Please make sure that you affix the self-adhe-

sive abrasive sheets can be concentrically to

the mounting plate.

Hazards in the work

environment

Slipping, tripping and falling are the

main causes of injuries at the work-

place. Keep in mind that surfaces may have

become slippery during machine use, and

remember tripping hazards caused by the air-

or hydraulic hose.

Proceed with caution in unfamiliar

surroundings. There may be hidden dangers

due to electrical cables or other supply lines.

These machines for sanding and

polishing are not suitable for use in

explosive environments and are not

insulated against contact with electri-

cal power sources.

Verify that there are no electrical lines,

gas lines, etc. that may result in a hazard in

the event of them becoming damaged during

machine use.

96905_par_Druckluft_Exzenterschleifer_content_GB_IE_FI_DK_BE.indd 9 30.04.14 15:46

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDEXS 150 A1 - IAN 96905 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDEXS 150 A1 - IAN 96905

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info