Bedienungsanleitung Parkside PDEXS 150 A1 - IAN 96905 (Seite 11 von 81) (Dänisch, Französisch, Schwedisch, Finnisch)

595405

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

11 GB/IE

Safety instructions

Safety instructions / Before Initial Use

Additional safety instructions

for pneumatic machinery

Compressed air can result in serious

injuries.

Always close the air supply, release pressure

from the hose, and disconnect the machine from

the compressed air supply, when the machine

is not in use, before switching accessories or

when performing repairs.

Never aim the air flow at yourself or

others.

Hoses flapping about can result in

serious injuries. Therefore, always inspect

hoses and their fasteners for damage and a

secure fit.

If using universal swivel couplings (coupling

discs) always use locking pins. Whip-check

hose safety cables must be used for protection

in the event the connection between the hose

and the machine or in between hoses fails.

Ensure not to exceed the maximum

pressure specified on the machine.

Never carry pneumatic tools by the

hose.

Original accessories / tools

Use only the accessories detailed in the

operating instructions. The use of inserted

tools or accessories other than those recom-

mended in the operating instructions could lead

to you suﬀering an injury.

Before Initial Use

Check that all of the unit‘s parts are in perfect

condition.

Selecting the sanding disc

Surface and stripping:

The quality of the surface und stripping performance

are determined by the grit size of the sanding disc.

Use the corresponding grinding discs with

diﬀerent grain sizes for processing diﬀerent

materials.

Changing the sanding disc

The compressed air orbital sander is ﬁtted with

hook and loop fastening, allowing for quick and

easy sanding disc changes.

Lift the grinding disc at the side and pull it oﬀ

the disc wheel

Note: Clean any dust or dirt oﬀ the disc

wheel

before attaching a new sanding disc.

Be sure the openings in the sanding disc match

the openings on the disc wheel

Establishing connections

Note: Only use connection hoses with a minimum

inside diameter of 9 mm.

First wrap some Teﬂon tape (not included) around

the external threads of the plug nipple

Now screw the plug nipple

into the com-

pressed air connection of the orbital sander

Be sure to tighten this connection with pliers us-

ing moderate force

Now push the compressed air hose onto the

plug nipple

, using moderate force, until the

hose locks into place.

Dust / shavings extraction

Be sure to read and follow the „Safety Instruc-

tions“ section.

Using the internal vacuum extraction

with dust collection device (see Fig. B):

Slide the exhaust air hose

onto the connec-

tion of the dust extraction

Then slip the opening of the dust bag

over

the loose end of the extraction hose

and

fasten the dust bag

Note: Empty the dust bag

in a timely

fashion and regularly to ensure optimal dust

96905_par_Druckluft_Exzenterschleifer_content_GB_IE_FI_DK_BE.indd 11 30.04.14 15:46

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDEXS 150 A1 - IAN 96905 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDEXS 150 A1 - IAN 96905

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info