Bedienungsanleitung Parkside PDEXS 150 B2 - IAN 110141 (Seite 9 von 76) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch, Finnisch)

595309

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

PDEXS 150 B2

■ If universal rotary joints (claw couplings) are

used, locking pins must be used to provide pro-

tection; Whipchek

air hose restraints must be

used to provide protection in case of a failure

of the connection of the hose to the machine.

■ Ensure that the maximum permissible pressure

stated on the machine is not exceeded.

■ Never carry compressed-air-powered machines

by the hose.

Special safety instructions

■ Always wear eye protection when using

or maintaining the sander.

■ Always wear suitable protective clothing.

Protect your hands, hair and clothes from being

drawn in by rotating parts.

■

Always wear a dust mask in situations in

which large amounts of dust are being

generated.

■ Always wear hearing protection.

■

Always wear protective gloves.

■ Only connect the sander to the compressed air

network when it is switched oﬀ.

■ Sparks are created during grinding. Ensure that

nobody can be endangered by ﬂying sparks.

You should also remove any ﬂammable materials

or objects.

■ Do not carry the grinder if it has been connected

to the compressed air hose.

■ Be aware of the danger caused by a ﬂailing

compressed air hose!

■ The grinder is not approved for use with cutting discs!

■ The ﬂow pressure of 6.3 bar may not be

exceeded during operation.

■ Never use oxygen or other ﬂammable gases as

an energy source.

■ Switch the appliance on before applying it to the

workpiece. After completing the task, lift the ap-

pliance from the workpiece and then switch it oﬀ.

■ Once you have completed your work, switch

the grinder oﬀ and place it down securely once

it has come to a standstill.

Caution! Grinder continues to run.

■ Once you have completed your work, disconnect

the grinder from the compressed air supply.

■ Be aware that when processing certain materials

there is a danger that dust and vapours can arise

that could create an explosive atmosphere.

Use vacuum cleaners and suitable protective

equipment.

Before initial operation

NOTE

► The grinder may only be operated on cleaned,

oil-atomised compressed air and may not

exceed the maximum operating pressure of

6.3 bar at the appliance. The compressor

must be ﬁtted with a pressure reducer to

regulate the working pressure.

► Wind the Teﬂon tape

supplied around all

threaded connectors.

Fitting the connector nipple

♦ Remove the plastic protective cap from the

appliance’s air inlet.

♦ Wrap the threads on the connector nipple

with the Teﬂon tape supplied.

♦ Screw the connector nipple

into the air inlet.

Fitting the grinding disc

The compressed air-powered random orbital

sander is equipped with a protective cuﬀ .

■

Rotation direction indicator of the

grinding disc .

♦ To ﬁt or replace the grinding disc

invert the

protective cuﬀ (see Fig. 1).

Fig. 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDEXS 150 B2 - IAN 110141 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info