Bedienungsanleitung Parkside PDMS A1 - IAN 43105 (Seite 27 von 34) (Deutsch, Englisch, Holländisch)

595411

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

PDMS A1

■ The grinder may not be used for drilling or

screwing!

■ The grinder is not approved for the use of cut-oﬀ

wheels!

■ The ﬂ ow pressure of 6.3 bar may on no account

be exceeded during operation.

■ Never use oxygen or other ﬂ ammable gases as

an energy source.

■ Once you have completed your work, switch

the grinder oﬀ and place it down securely once

it has come to a standstill.

Caution ! Grinder continues to run.

■ Once you have completed your work, disconnect

the grinder from the compressed air supply.

■ Be aware of the danger that dust and vapours,

which can create an explosion-hazardous

atmosphere, can occur when processing certain

materials. Use vacuum cleaners and suitable

protective equipment.

Hazards caused by parts ﬂ ung out

■ If a workpiece or accessory or even part of the

machine tool itself breaks, parts can be ﬂ ung

out at high speeds.

■ When using the grinder for grinding pencils or

when replacing accessories on the machine,

impact-proof eye protection must be worn. The

degree of necessary protection must be evaluated

especially for each individual purpose.

■ You must ensure that the workpiece has been

securely ﬁ xed.

■ Check regularly to ensure that the grinder

rotational speed does not exceed the rotational

speed stated on the grinding pencils. This

rotational speed monitoring must take place

without an installed grinding pencil / grinding

aid and in agreement with the manufacturer's

instructions.

■ Ensure that any sparks and fragments caused

during use do not present any hazards.

■ Disconnect the grinder from the power supply

before replacing the grinding material and

before servicing.

■ In this case, the risks for others should also be

assessed.

Hazards caused by entanglement

Suﬀ ocation, scalping or and/or cut wounds can

occur if loose clothing, jewellery, necklaces, hair

or gloves are not kept away from the machine and

its accessories.

Hazards during operation

■ Avoid contact with the rotating shaft and the

installed tools in order to prevent cuts to the

hands and other body parts.

■ When using the machine, the operator's hands

can be subject to hazards such as cuts, grazing

and heat. Wear suitable gloves to protect your

hands.

■ The operator and maintenance personnel must

be physically capable of handling the size,

mass and power of the machine.

■ Hold the machine correctly: be ready to

counteract any normal or sudden movements -

have both hands ready.

■ Ensure that your body is balanced and that you

have a secure standing position.

■ Use only lubricants recommended by the

manufacturer.

■ Suitable protective goggles must be worn;

wearing of safety gloves and safety clothing

is recommended.

■ A rotating ﬁ le may not be operated at a speed

higher than its nominal speed.

■ Wear a safety helmet if working above your

head.

■ Please note that the machine tool continues to

run after completion of the working process.

■ Warning is hereby made of the risk of explosion

or ﬁ re due to the material being worked.

■ Release the start/stop control in case of a

disruption to the electricity supply.

Risks due to repetitive movements

■ When using a mini die grinder to perform work-

related activities, operators may experience

uncomfortable sensations in their hands and

arms, as well as in the neck and shoulders or

other parts of the body.

■ When using a mini die grinder, the operator

IB_43105_PDMSA1_LB1.indb 24IB_43105_PDMSA1_LB1.indb 24 14.05.14 11:1314.05.14 11:13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDMS A1 - IAN 43105 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDMS A1 - IAN 43105

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info