Bedienungsanleitung Parkside PEBS 900 SE - IAN 37835 (Seite 28 von 44) (Deutsch, Englisch, Portugiesisch, Spanisch)

679125

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

29 GB/MT

General safety advice for electrical power tools

b) Do not use an electrical power tool if

its switch is defective. An electrical power

tool that can no longer be switched on and oﬀ

is dangerous and must be repaired.

c) Pull the mains plug from the socket

before you make any adjustments to

the device, change accessories or

when the device is put away. This pre-

caution is intended to prevent you from uninten-

tionally starting the device.

d) When not in use always ensure that

electrical power tools are kept out of

reach of children. Do not let anyone

use the device if he or she is not famil-

iar with it or has not read the

instructions and advice. Electrical power

tools are dangerous when they are used by

inexperienced people.

e) Look after the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use

the device. Many accidents have their ori-

gins in poorly maintained electrical power

tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice,

and the stipulations drawn up for this

particular type of device. In doing this,

take into account the working condi-

tions and the task in hand. The use of

electrical power tools for purposes other than

those intended can lead to dangerous situations.

Safety advice for

belt sanders

J DANGER OF FIRE FROM FLYING

SPARKS! Sanding metal creates ﬂying sparks.

For this reason, always make sure that nobody

is placed in any danger and that there are no

inﬂammable materials near the working area.

J When undertaking prolonged sanding of

wood, and in particular when working on ma-

terials that give rise to dusts that are hazardous

to health, the sander must be connected to a

suitable external dust extraction device.

J Ensure that there is adequate ventilation when

working on plastic, paint, varnish etc.

J The belt sander is designed for the dry sanding

of large surfaces of wood, plastic, metal and

plaster and painted surfaces. The device is to

be used for dry sanding only.

J Do not sand materials containing asbestos.

Asbestos is a known carcinogen.

WARNING!

POISONOUS DUSTS!

Sanding paints containing lead, some types of

wood and metal for example may give rise to

hazardous or poisonous dusts and represents a

risk to the health of the person operating the

device and to anyone near the work area.

Wear safety glasses and a dust

protection mask!

J Securely support the workpiece. Use clamps or

a vice to grip the workpiece ﬁrmly. This is much

safer than holding it with your hand.

J Never support yourself by placing your hands

near or in front of the device or the workpiece

surface. A slip can result in injury.

J If a dangerous situation arises, pull the mains

plug immediately out of the mains socket.

J Always work with the mains lead leading

away from the rear of the device.

J Avoid contact with the moving sanding belt.

J Do not work on moistened materials or damp

surfaces.

J Always switch on the device before placing it

against the workpiece. After sanding, lift the de-

vice from the workpiece before switching it oﬀ.

J When working always hold the device securely

with both hands (see Fig. D). Always keep

proper footing and balance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PEBS 900 SE - IAN 37835 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PEBS 900 SE - IAN 37835

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info