Bedienungsanleitung Parkside PEH 30 A1 - IAN 102829 (Seite 29 von 34) (Deutsch, Englisch, Französisch)

576694

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

29 GB

General power tool safety warnings General power tool safety warnings / Preparing for use

erwise the device could kick back if the planer

blade gets snagged in the workpiece.

When working always keep the sole

flat against the workpiece. Otherwise

you could be injured if the plane tilts.

Never plane over metal objects. Other-

wise the planer blade / blade shaft

could

be damaged.

Secure the workpiece. Use clamps or a

vice to grip the workpiece ﬁrmly. This is much

safer than holding it with your hand.

Do not plane materials containing

asbestos. Asbestos is a known carcinogen.

The dust generated while planing

could be hazardous to health, inflam-

mable or explosive. Wear a dust mask and

use a suitable dust / debris vacuum extraction

device. Some dusts are known carcinogens.

When planing wood for long periods

and in particular when working on

materials that give rise to dusts that

are hazardous to health, the planer

must be connected to a suitable exter-

nal dust extraction device.

Do not use the power planer if its

mains lead is damaged. Damaged mains

leads increase the risk of electric shock.

Never support yourself by placing

your hands near or in front of the

device or on the workpiece surface.

If you slip you could be injured.

If a dangerous situation arises, pull

the mains plug immediately out of the

mains socket.

When taking a break from your

work, before carrying out any tasks

on the device itself (e.g. changing the

plane blade) or when you are not us-

ing the device, always pull the mains

plug out of the mains socket.

Always work with the mains lead lead-

ing away from the rear of the device.

Use sharp planer blades only.

Do not soak the materials or the sur-

face you are about to work on with

liquids containing solvents.

Avoid contact with rotating parts.

Never use the device for a purpose

for which it was not intended or with

non-original parts / accessories.

Hold the device securely when work-

ing. Ensure that you are standing in a stable,

well-balanced position.

Always keep the device clean, dry and

free from oil or grease.

Safety instructions for planers

Wait for the cutter spindle to stop completely

before setting down the power tool. An ex-

posed rotating cutter spindle can catch on the

surface, resulting in loss of control and serious

injuries.

Only hold the power tool by the insulated handle

areas as the cutter spindle may touch the tool‘s

mains cable. Contact with a live wire could

cause metal parts of the device to become live

and lead to electric shock.

Fix and secure the work piece to a stable sur-

face using clamps or other means. When only

securing the work piece by hand or against

your body it will remain unstable, which could

lead to loss of control.

riginal accessories / attachments

Use only the accessories and attach-

ments detailed in the operating instruc-

tions. The use of attachments or accessories

other than those recommended here could lead

to you suﬀering an injury.

Preparing for use

Switching On / Oﬀ

Switching on:

First press the safety lock-out

Then press and keep pressed the ON / OFF

switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PEH 30 A1 - IAN 102829 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info