Bedienungsanleitung Parkside PFBS 12 B2 - IAN 305279 (Seite 10 von 36) (Englisch)

679265

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

PFBS 12 B2

│

7 ■

j) Hold the power tool only by the insulated

gripping surfaces when performing an oper-

ation where the accessory tool may contact

hidden wiring or its own cord. Contact with

a live cable can also make metal parts of the

appliance live and could result in an electric

shock.

k) Always hold the power tool ﬁrmly. When

running up to full speed, the torque of the motor

can cause the power tool to twist.

l) If possible, use clamps to hold the workpiece

in position. Never hold a small workpiece

in one hand and the power tool in the other

while you are using it. By clamping small

workpieces, you keep both hands free for better

control of the power tool. When cutting round

workpieces such as dowels, rods or pipes, be

aware that these can roll away and this can

cause the tool to jam and be thrown towards

you.

m) Hold the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get cut or caught and your

hand or arm could get caught in the rotating

accessory tool.

n) Never put the power tool down until the

accessory tool has come to a complete stand-

still. The rotating accessory tool can come into

contact with the surface and cause you to lose

control of the power tool.

o) When changing accessory tools or changing

settings, tighten the collet nut, the chuck or

other ﬁxing elements tightly. Loose fastening

elements can shift unexpectedly and lead to

loss of control; unsecured, rotating components

will ﬂy oﬀ violently.

p) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

lead to physical injury.

q) Clean the ventilation slits of your power tool

regularly. The engine fan draws dust into the

housing and a strong accumulation of metal

dust can cause electrical hazards.

r) Do not use the power tool in the vicinity of

ﬂammable materials. Sparks can ignite such

materials.

s) Do not use any accessory tools which require

liquid coolant. The use of water or other liquid

coolants may lead to electric shock.

Additional safety instructions for all

applications

Kickback and corresponding safety instruc-

tions

Kickback is a sudden reaction caused when a

rotating accessory tool, e.g. grinding disc, grinding

band, wire brush, etc., catches or jams and leads

to an abrupt stop of the rotating accessory tool.

If this happens, an uncontrolled power tool will

turn rapidly against the direction of rotation of the

accessory tool.

If, for example, a grinding disc catches or jams,

the edge of the grinding disc that is projecting into

the workpiece can get caught and break oﬀ the

grinding disc or cause a kickback. The grinding

disc can then ﬂy in the direction of the operator

or away from him, depending on the direction of

rotation of the disc at the blockage. This can also

break grinding discs.

A kickback is caused by improper or incorrect use

of the power tool. This can be avoided by taking

proper precautions as described below.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PFBS 12 B2 - IAN 305279 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PFBS 12 B2 - IAN 305279

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info