Bedienungsanleitung Parkside PHD 150 F4 - IAN 291639 (Seite 6 von 46) (Englisch)

674490

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

GB IE NI CY

Technical data

Pressure cleaner .........PHD 150 F4

Mains connection ............. 230 V~, 50 Hz

Power consumption ....................2100 W

Mains cable length ............................ 5 m

High-pressure hose length .................10 m

Weight (without accessories) ........11.4 kg

Safety class ...................................... II

Degree of protection .........................IPX5

Rated/operating pressure (p) ........11 MPa

Max. permissible pressure (p max) ...15 MPa

Max. inow pressure (p in max) ... 0.8 MPa

Max. inow temperature (T in max) ..40 °C

Pumping rate, water (Q)............ 5.5 l/min

Max. pumping rate, water

(Q max) .................................. 7.5 l/min

Sound pressure level

) ....................... 77 dB(A); K

= 3 dB

Sound power level (L

)

measured ...89.88 dB(A); K

= 2,24 dB

guaranteed .......................... 92 dB (A)

Vibration (a

) ......2.34 m/s

; K=0.15 m/s²

The values for noise and vibration were

determined according to

EN 60335-2-79:2012.

Do not exceed the maximum permitted

network impedance of 0.385 Ohms at the

electrical connection point.

The user must ensure that the device is

operated only on a power supply network

that fulls this requirement.

If necessary, the local power supply com-

pany can be asked for the system imped-

ance.

Technical and optical changes can be

carried out in the course of further develop-

ment without notice. All dimensions, refer-

ences and information of this instruction

manual are therefore without guarantee.

Legal claims, which are made on the basis

of the instruction manual, cannot thus be

considered as valid.

The stated vibration emission value was

measured in accordance with a standard

testing procedure and may be used to com-

pare one power tool to another.

The stated vibration emission value may

also be used for a preliminary exposure

assessment.

Warning: The vibration emission

value may differ during actual use

of the power tool from the stated

value depending on the manner in

which the power tool is used.

Safety precautions aimed at protect-

ing the user should be based on esti-

mated exposure under actual usage

conditions (all parts of the operating

cycle are to be considered, includ-

ing, for example, times during which

the power tool is turned off and

times when the tool is turned on but

is running idle).

Notes on Safety

This section is concerned with the basic

safety rules when working with the pres-

sure cleaner.

Explanation of symbols

Attention!

Before beginning work, familiarise

yourself thoroughly with all the op-

erating elements, particularly with

how they function and operate. Ask

a specialist if necessary.

Attention: Remove the plug from the

socket as soon as the power lead is

damaged or cut.

Also disconnect the plug from the

socket when connecting to the

water supply or trying to eliminate

leaks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHD 150 F4 - IAN 291639 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PHD 150 F4 - IAN 291639

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info