Bedienungsanleitung Parkside PHD 150 F4 - IAN 291639 (Seite 8 von 46) (Englisch)

674490

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

GB IE NI CY

ried out by an authorised electrician.

In the case of repairs, always contact

our service centre.

Electrical safety:

Caution: to avoid accidents

and injuries from electric

shocks:

• The plug and socket of an extension

cable must be water-tight!

Unsuitable extension cables can

be dangerous as people can be

harmed by an electric shock!

• Protect the electric plug connections

against moisture.

• If there is a risk of ooding, x the

plug connections in an area that is safe

from ooding.

• Ensure that the mains voltage matches

the specications on the rating plate.

• Connection to the mains must be

carried out by an experienced electri-

cian and meet the requirements of

IEC60364-1.

• The electrical installation shall be ac-

cording to national wiring rules.

• The device must only be connected to

a mains socket via a residual-current

circuit breaker (RCD) with a rated leak-

age current of not more than 30 mA.

Fuse: at least 13 ampere.

• Before each use, check the equipment,

cable and plug for damage.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

• Do not pull the plug from the socket by

the cable. Protect the cable from heat,

oil and sharp edges.

• Do not carry or x the equipment by

the cable.

• Take appropriate measures to keep

children away from the equipment

whilst it is running.

• Do not use the equipment in the vicinity

of ammable liquids or gases. Non-

observance will result in a risk of re

or explosion.

• Do not spray combustible liquids. Risk

of explosion.

• If you come into contact with cleaning

agents, rinse with plenty of clean wa-

ter.

• Store the equipment in a dry place and

out of reach of children.

Caution! To avoid damage to

the equipment and any pos-

sible person injury resulting

from this:

• Do not work with damaged or incom-

plete equipment, or with equipment

that has been converted without the

approval of the manufacturer. Before

initial operation, have a specialist

check that the required electrical pro-

tection measures are in place.

• Do not operate the equipment if the

mains cable, water supply or other im-

portant parts such as the high-pressure

hose or gun are damaged/leaking.

• Protect the pressure cleaner from frost

and dry running.

• High-pressure hoses, ttings and

couplings are important for machine

safety. Use only high-pressure hoses,

ttings and couplings recommended by

the manufacturer.

• Use only original accessories and do

not carry out conversion work on the

equipment.

• Please read the notes in the operating

instructions on the topic of “mainte-

nance and cleaning”. Any measures

above and beyond these, particularly

opening the equipment, are to be car-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHD 150 F4 - IAN 291639 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PHD 150 F4 - IAN 291639

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info