Bedienungsanleitung Parkside PHD 150 F4 - IAN 291639 (Seite 9 von 46) (Englisch)

674490

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

NIIEGB

• Use only extension cables that are pro-

tected from spray water and designed

for outdoor use. Always fully unroll a

cable drum before use. Check the ca-

ble for damage.

• Before any work on the equipment,

during work breaks and in the case

of non-use, remove the plug from the

socket.

• The cross-section of the power sup-

ply cable must not be less than

2x2,5mm².

• Wear sturdy footwear to protect

against electric shock.

• To protect against electric shock, oper-

ate the equipment only in an upright

position.

Start-up

In keeping with current regulations a

pressure cleaner must never be oper-

ated off the drinking water mains

supply without a controllable back-

ow preventer. A suitable backow

preventer in conformity with

EN 12729 type BA must be used.

Water that has passed through a backow

preventer is classied as undrinkable.

A backow preventer is available in spe-

cialist shops.

A system separator (check valve) prevents

the backow of water and detergent into

the drinking water pipeline.

• Employ an ordinary garden hose for

the water intake and ensure sufcient

length.

• Use the device on a domestic water

connection with an output of at least

450 l/h.

• Irrespective of the water pipe, you can

also use the device (for example, rain

barrel) through the integrated water

suction function. This function must only

be used with a suction hose with a l-

ter basket.

The device itself must not be immer-

sed in open water sources. There

is a risk of personal injury from an

electric shock.

Do not draw in any water from na-

tural accumulations. There is a risk

of contamination from backwashed

cleaning agent.

Setting up

1. Pull the curved handle (1) up as far as

it will go.

2. Connect the high-pressure tting (jet

gun) (28) to the jet gun (16). Ensure

that the hose runs to the front, so as not

to impede the handle (1).

3. Connect the feed hose to the water

supply and allow water to escape from

the other end of the feed hose with no

bubbles, in order to expel the air from

the feed hose. Switch off the water tap.

4. Connect the feed hose with the help of

the quick connector for garden hose

adapter (25) with the water connection

coupling (13) and the water connec-

tion (14) on the device.

5. Connect to the spray gun (16) by

inserting and screwing in the jet pipe

(20).

6. If the jet pipe (20) is mounted, connect

either the turbo dirt mill (24) or the

standard Vario nozzle (18) by screw-

ing in with the jet pipe (20).

7. Screw in to connect the detergent con-

tainer with nozzle (9) directly to the

spray gun (16). With using the clean-

ing agent container with the nozzle

(9), pour only cleaning agent into the

container. It is sucked in automatically.

The roles of the unit, use the handle

(1) only in conjunction with the

wheels (12). For lifting and carrying

use the carrying handle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHD 150 F4 - IAN 291639 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PHD 150 F4 - IAN 291639

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info