Bedienungsanleitung Parkside PHDP 180 B2 - IAN 373334 (Seite 27 von 158) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Polnisch)

796055

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

3. Insert the high-pressure hose into the high-

pressure connection on the trigger gun (1).

Do not guide the hose through the bow-

type handle (2) as to not obstruct the bow-

type handle.

Establishing a water supply

You have two options to supply the device with

water:

• Household water connection

• Suctioning standing, clean water, e.g. rain

barrel

Household water connection

Requirements

• Supply hose: Garden hose with fitted

garden hose adaptor (34); 13mm (½");

length between 5m and 30m

• Minimum pump capacity: 540l/h (9l/min)

• System separator

A system separator (check valve) prevents

the backflow of water and cleaning agent

into the drinking water pipeline.

• According to current regulations, a pres-

sure washer must never be connected

to the drinking water network without a

system separator. A suitable system sep-

arator must be used in accordance with

EN12729 Type BA.

• Water that has flowed through a system

separator is classified as non-potable.

• System separators are available from

specialist dealers.

Procedure

1. Insert the filter insert (30) in the water con-

nection (28).

2. Mount the quick connector for the garden

hose (29) on the water connection.

3. Mount the garden hose adaptor (34) on

the supply hose.

• Remove the grooved clamping nut.

• Push the clamping nut over the end of

the hose.

• Insert the end of the hose into the thread

of the garden hose adaptor.

• Fix the garden hose adaptor with the

clamping nut.

• Check whether the garden hose adaptor

is mounted securely to the garden hose.

4. Connect the supply hose to the water sup-

ply.

5. Bleed the supply hose: Open the water sup-

ply until the water flows bubble-free out of

the other end of the supply hose. Close the

water supply.

6. Connect the garden hose adaptor (34) on

the supply hose to the quick connector for

the garden hose (29).

Suctioning water

Requirements

• NOTICE!Contamination from backwashed

cleaning agent! Do not draw in any water

from natural accumulations.

• Suction hose with filter basket (not in-

cluded )

• standing, clean water, e.g. rain barrel

• Max. suction height: 0.5m

Procedure

WARNING!Electric shock! The device it-

self must not be submerged in the water collect-

or.

NOTICE!Damage due to dry running! Ensure

there is a sufficient and reliable water supply.

1. Connect the suction hose with filter basket

to the quick connector with filter insert (29)

on the water connection (28) of the device.

2. Insert the end with the filter basket into the

water collector.

3. Remove the lance (4) from the trigger gun

(1).

4. Press and hold the switch lever (17).

5. Move the On/Off switch (32) to the posi-

tion “I” (ON).

The device begins to suction water and air

can escape.

6. Once the device is free of air, you can re-

lease the switch lever.

7. Fit an attachment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHDP 180 B2 - IAN 373334 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info