Bedienungsanleitung Parkside PHDP 180 B2 - IAN 373334 (Seite 29 von 158) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Polnisch)

796055

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

age to the device is not covered by the war-

ranty.

• You can buy cleaning agents from our on-

line shop.

Requirements

• The cleaning agent tank is filled with clean-

ing agent.

• 3-in-1 nozzle is at the position foam nozzle

for cleaning agent.

• The rotatable pressure setting (20) on the

trigger gun (1) is at the position high pres-

sure for walls and foam, the LC display

(15) shows .

Filling and emptying the cleaning

agent tank

1. Remove the sealing cap with suction hose

(12) from the cleaning agent tank (13).

2. Pull the cleaning agent tank up and then

away from the device.

 The cleaning agent tank is removed and

can be filled or emptied.

3. Insert the cleaning agent tank in reverse or-

der.

4. Seal the cleaning agent tank with the seal-

ing cap.

5. Push the suction hose into the cleaning

agent tank until it reaches the bottom.

Switching on

WARNING!A leaky water system can

result in electric shock! Move the On/Off

switch (32) to the position “0” (OFF). Pull out

the plug. Try connecting the water again (see

Establishing a water supply, p.27).

WARNING!The device may only be used

in an upright position! There is a risk of an elec-

tric shock if the device falls over. Move the

On/Off switch (32) to the position “0” (OFF).

Pull out the plug. Only now may you bring the

device into the upright position. For your own

safety, wait about five minutes until you restore

the electrical connection.

WARNING!Unsuitable extension cables

can be dangerous! Use only extension cables

that are designed for outdoor use. The connec-

tion must be dry and routed above the ground.

We recommend using a cable drum that holds

the socket at least 60mm above the ground.

1. Ensure that the On/Off switch (32) is in the

“0” (OFF) position.

2. Put the device in an upright position.

3. Insert the mains plug into an earthed socket

with residual current circuitry.

The right part of the holder for the mains

connection cable (11) as seen from behind

is rotatable. This allows you to easily re-

move the mains connection cable (10).

4. NOTICE!Dry running will damage the

device. Do not operate the pressure washer

with the tap turned off.

Turn the tap on fully.

5. Move the On/Off switch (32) to the posi-

tion “I” (ON).

The motor switches on briefly until the

necessary pressure has built up. The motor

then stops.

6. WARNING!Be aware of the recoil

force when the water jet commences. There

is a risk of injuring yourself or other people.

Ensure that your footing is secure. Keep a

good hold on the trigger gun (1).

Press the switch lever (17) on the trigger

gun (1).

The nozzle starts working at pressure

and the motor starts. If you release the

switch lever (17), the motor stops. The high

pressure is maintained in the system.

Interrupting the operation

You can insert the trigger gun (1) with lance

and nozzle into the holder for the trigger gun

(31).

1. Release the switch lever (17) on the trigger

gun (1).

2. If you put down the trigger gun: Lock the

switch lever using the child safety lock (18)

(seen from behind).

 The switch lever is locked .

You can pull the switch lever .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHDP 180 B2 - IAN 373334 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info