679113
11
Zoom out
Zoom in
Vorherige Seite
1/50
Nächste Seite
PHKSA 12 A1
8 
GB
IE
NI
CY
Do not allow the teeth of the saw blade to
overheat.
When sawing plastic, avoid melting the plastic.
Wear a dust mask when sawing.
Only use recommended saw blades.
Always wear hearing protection!
Safety information for circular saw
blades
Wear protective gloves!
Wear a dust mask!
Wear protective goggles!
Wear hearing protection!
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Original accessories/auxiliary
equipment
Only use the accessories and additional
equipment that are specified in the oper-
ating instructions and compatible with the
appliance.
Before use
Removing/charging/inserting the
battery pack
CAUTION!
Always unplug the appliance before you
remove the battery pack
from or connect
the battery pack to the charger.
NOTE
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. This guarantees
full battery performance. You can charge the
lithium-ion battery at any time without short-
ening its service life. Interrupting the charging
process does not damage the battery.
If the battery overheats during operation, it
cannot be charged immediately. Allow it to
cool down first.
Never charge the battery pack
if the
ambient temperature is below 10°C or above
40°C.
1. To remove the battery pack
, press the release
button and pull the battery pack out of the
appliance.
2. Insert the battery pack
into the high-speed
charger .
3. Insert the mains plug into the socket. The control
LED
lights up red.
4. The green charge status indicator LED
indicates
that the charging process is complete and the
battery pack is ready.
5. Insert the battery pack
back into the appliance.
Checking blade guard functionality
Pull the release lever for the blade guard as
far as it will go.
The blade guard
should move without jamming.
When letting go of the release lever for the blade
guard , it should automatically jump back to its
original position.
Operation
Fitting/changing the saw blade
Always remove the battery pack before changing
the saw blade !
1. Set the cutting depth (using the locking screw
)
to the minimum position, 0 mm.
2. Swing the blade guard
back using the
release lever and put the appliance down.
3. Press the spindle lock button
(until it engag-
es) and hold it in.
IB_302329_PHKSA12A1_LB6-.indb 8 29.03.18 13:44
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PHKSA 12 A1 - IAN 302329 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Parkside PHKSA 12 A1 - IAN 302329

Parkside PHKSA 12 A1 - IAN 302329 Bedienungsanleitung - Deutsch, Holländisch, Dänisch, Französisch - 62 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info