Bedienungsanleitung Parkside PKO 24 A1 - IAN 339151 (Seite 18 von 80) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

786099

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

13GB/IE

2. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment and suc-

cess.

Note:

According to the applicable product liability laws, the manu-

facturer of the device does not assume liability for damages

to the product or damages caused by the product that occurs

due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service techni-

cians,

• Installation and replacement of non-original spare parts,

• Application other than speciﬁed,

• A breakdown of the electrical system that occurs due to the

non-compliance of the electric regulations and local regula-

tions.

Please consider:

Read through the complete text in the operating instructions be-

fore installing and commissioning the device.

The operating instructions are intended to help the user to be-

come familiar with the machine and take advantage of its ap-

plication possibilities in accordance with the recommendations.

The operating instructions contain important information on

how to operate the machine safely, professionally and econom-

ically, how to avoid danger, costly repairs, reduce downtimes

and how to increase reliability and service life of the machine.

In addition to the safety regulations in the operating instruc-

tions, you have to meet the applicable regulations that apply

for the operation of the machine in your country.

Keep the operating instructions package with the machine at

all times and store it in a plastic cover to protect it from dirt

and moisture. Read the instruction manual each time before

operating the machine and carefully follow its information. The

machine can only be operated by persons who were instructed

concerning the operation of the machine and who are informed

about the associated dangers. The minimum age requirement

must be complied with.

In addition to the safety instructions contained in this operating

manual and the speciﬁc regulations of your country, the techni-

cal rules generally accepted for the operation of machines of

the same type must be observed.

We accept no liability for damage or accidents which arise

due to non-observance of these instructions and the safety in-

formation.

3. Device description (ﬁg. 1-13)

1. Transport handle

2. Pressure switch

3. Quick-lock coupling (regulated compressed air)

4. Pressure gauge (for reading the preset vessel pressure)

5. Pressure regulator

6. Pressure gauge (for reading the vessel pressure)

7. Quick-lock coupling (unregulated compressed air)

8. Pressure vessel

9. Supporting foot

10. Drain plug for condensation water

11. Wheel

12. Oil drain plug

13. Compressor pump

14. Compressed air hose

15. Air ﬁlter

16. Oil sealing plug

17. ON/OFF switch

18. Oil-level window

19. Safety valve

20. Oil ﬁlling opening

21. Fillister head screw

22. Washer

23. Screw

24. Overload switch

4. Scope of delivery

1x Air ﬁlter

2x Supporting foot

2x Wheel

1x Mounting material

1x Oil sealing plug

1x Oil bottle

1x Compressed air hose

1x Operating Manual

5. Intended use

The compressor is designed to generate compressed air for

compressed-air driven tools which can be driven with an air

volume of up to approx. 260 l/min (e. g. tire inﬂator, blow-out

pistol and paint spray gun). Due to the limited air output it is

not possible to use the compressor to drive tools with very high

air consumption (for example orbital sanders, die grinders and

hammer screwdrivers).

The equipment is to be used only for its prescribed purpose.

Any other use is deemed to be a case of misuse. The user / op-

erator and not the manufacturer will be liable for any damage

or injuries of any kind caused as a result of this.

Please note that our equipment has not been designed for use

in commercial, trade or industrial applications. Our warranty

will be voided if the equipment is used in commercial, trade or

industrial businesses or for equivalent purposes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PKO 24 A1 - IAN 339151 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info