Bedienungsanleitung Parkside PKO 270 A1 - IAN 109808 (Seite 35 von 44) (Deutsch, Englisch, Holländisch, Französisch)

595285

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

30 GB

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of mis-

use. The user / operator and not the manufacturer will

be liable for any damage or injuries of any kind caused

as a result of this.

Please note that our equipment has not been designed

for use in commercial, trade or industrial applications.

Our warranty will be voided if the equipment is used

in commercial, trade or industrial businesses or for

equivalent purposes.

5. Safety information

n Attention! The following basic safety measures

must be observed when using electric tools for protec-

tion against electric shock, and the risk of injury and

re. Read all these notices before using the electric

tool and keep the safety instructions for later refer-

ence.

Attention! The following basic safety actions must be

taken when using this compressor in order to protect

the user from electric shocks and the risk of injury and

 re. Read and follow these instructions before using

the equipment.

Safe work

1 Keep the work area orderly

– Disorder in the work area can lead to accidents.

2 Take environmental inuences into account

– Do not expose electric tools to rain.

– Do not use electric tools in a damp or wet envi-

ronment. There is a risk of electric shock!

– Make sure that the work area is well-illuminated.

– Do not use electric tools where there is a risk of

re or explosion.

3 Protect yourself from electric shock

– Avoid physical contact with earthed parts (e.g.

pipes, radiators, electric ranges, cooling units).

4 Keep children away

– Do not allow other persons to touch the equip-

ment or cable, keep them away from your work

area.

5 Securely store unused electric tools

– Unused electric tools should be stored in a dry,

elevated or closed location out of the reach of

children.

6 Do not overload your electric tool

– They work better and more safely in the specied

output range.

7 Wear suitable clothing

– Do not wear wide clothing or jewellery, which can

become entangled in moving parts.

– Rubber gloves and non-slip shoes are recom-

mended when working outdoors.

– Tie long hair back in a hair net.

8 Do not use the cable for purposes for which it is

not intended

– Do not use the cable to pull the plug out of the

outlet. Protect the cable from heat, oil and sharp

edges.

9 Take care of your tools

– Keep your compressor clean in order to work

well and safely.

– Follow the maintenance instructions.

– Check the connection cable of the electric tool

regularly and have it replaced by a recognised

specialist when damaged.

– Check extension cables regularly and replace

them when damaged.

10 Pull the plug out of the outlet

– During non-use of the electric tool or prior to

maintenance and when replacing tools such as

saw blades, bits, milling heads.

11 Avoid inadvertent starting

– Make sure that the switch is switched off when

plugging the plug into an outlet.

12 Use extension cables for outdoors

– Only use approved and appropriately identied

extension cables for use outdoors.

– Only use cable reels in the unrolled state.

13 Remain attentive

– Pay attention to what you are doing. Remain

sensible when working. Do not use the electric

tool when you are distracted.

14 Check the electric tool for potential damage

– Protective devices and other parts must be care-

fully inspected to ensure that they are fault-free

and function as intended prior to continued use

of the electric tool.

– Check whether the moving parts function fault-

lessly and do not jam or whether parts are dam-

aged. All parts must be correctly mounted and all

conditions must be fullled to ensure fault-free

operation of the electric tool.

– Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is speci-

ed in the operating manual.

– Damaged switches must be replaced at a cus-

tomer service workshop.

– Do not use any faulty or damaged connection

cables.

– Do not use any electric tool on which the switch

cannot be switched on and off.

15 Have your electric tool repaired by a qualied

electrician

– This electric tool conforms to the applicable

safety regulations. Repairs may only be per-

formed by an electrician using original spare

parts. Otherwise accidents can occur.

16 Important!

– For your own safety you must only use the

accessories and additional units listed in the op-

erating instructions or recommended or specied

by the manufacturer. The use of mounted tools

or accessories other than those recommended in

the operating instructions or catalog may place

your personal safety at risk.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PKO 270 A1 - IAN 109808 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info