595285
36
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
31GB
17 Noise
Wear ear muffs when you use the compressor.
18 Replacing the power cable
To prevent hazards, leave the replacement of
damaged power cables strictly to the manufac-
turer or a qualied electrician. There is a risk of
electric shock!
19 Inating tires
Directly after inating tires, check the pressure
with a suitable pressure gauge, for example at
your lling station.
20 Roadworthy compressors for building site operations
Make sure that all lines and ttings are suitable
for the maximum permissible operating pressure
of the compressor.
21 Place of installation
Set up the compressor on an even surface.
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed
air and blasting guns
The compressor pump and lines can become very
hot during operation. Touching these parts will burn
you.
The air which is sucked in by the compressor must
be kept free of impurities that could cause res or
explosions in the compressor pump.
When releasing the hose coupling, hold the hose
coupling piece with your hand. This way, you can
protect yourself against injury from the rebounding
hose.
Wear safety goggles when working with the blow-
out pistol. Foreign bodies or blown off parts can
easily cause injuries.
Do not blow at people with the blow-out pistol and
do not clean clothes while being worn. Risk of
injury!
Safety information for paint spraying
Do not process any paints or solvents with a flash point
below 55° C. There is a risk of explosion!
Do not heat up paints or solvents. There is a risk of
explosion!
If hazardous liquids are processed, wear protective filter
units (face guards). Also, adhere to the safety information
provided by the manufacturers of such liquids.
The details and designations of the Ordinance on
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must be
observed.
Additional protective measures are to be undertaken if
necessary, particularly the wearing of suitable clothing
and masks.
Do not smoke during the spraying process and/or in
the work area. There is a risk of explosion! Paint vapors
are easily combustible.
Never set up or operate the equipment in the vicinity of
a fire place, open lights or sparking machines.
Do not store or eat food and drink in the work area.
Paint vapors are harmful to your health.
The work area must exceed 30 m3 and sufficient
ventilation must be ensured during spraying and drying.
Do not spray against the wind. Always adhere to the
regulations of the local police authority when spraying
combustible or hazardous materials.
Do not process media such as white spirit, butyl alcohol
and methylene chloride with the PVC pressure hose.
These media will destroy the pressure hose.
Operating pressure vessels
You must keep your pressure vessel in good working
order, operate the vessel correctly, monitor the vessel,
carry out necessary maintenance and repair work im-
mediately and meet the relevant safety precautions.
The supervisory authority may enforce essential con-
trol measures in individual cases.
A pressure vessel is not allowed to be used if it has
faults or deciencies that can endanger workers or
third parties.
Check the pressure vessel for signs of rust and dama-
ge each time before using. Do not use the compressor
with a damaged or rusty pressure vessel. If you dis-
cover any damage, then please contact the customer
service workshop.
Do not lose these safety instructions
6. Technical data
Mains connection 230 V ~ 50 Hz
Motor rating W 1800
Operating mode S1
Compressor speed min
-1
2850
Pressure vessel capacity
(in liters)
24
Operating pressure approx. 8 bar
Theoretical intake capaci-
ty (l/min)
approx. 270
sound power level L
WA
97 dB(A)
uncertainty K
WA
4 dB
Protection type IP20
Weight of the unit in kg 26
Oil (15W 40) l 0,3
Max. altitude (above mean
sea level)
1000 m
The noise emission values were measured in accord-
ance with EN ISO 2151.
Wear hearing protection.
The effects of noise can cause a loss of hearing.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PKO 270 A1 - IAN 109808 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info