Bedienungsanleitung Parkside PKO 270 A2 - IAN 275673 (Seite 36 von 44) (Deutsch, Englisch, Holländisch, Französisch)

668306

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

37GB

16 Important!

– For your own safety you must only use the acces-

sories and additional units listed in the operating

instructions or recommended or speciﬁed by the

manufacturer. The use of mounted tools or ac-

cessories other than those recommended in the

operating instructions or catalogue may place

your personal safety at risk.

17 Noise

– Wear ear muffs when you use the compressor.

18 Replacing the power cable

– To prevent hazards, leave the replacement of

damaged power cables strictly to the manufac-

turer or a qualiﬁed electrician. There is a risk of

electric shock!

19 Inﬂating tires

– Directly after inﬂating tires, check the pressure

with a suitable pressure gauge, for example at

your ﬁlling station.

20 Roadworthy compressors for building site operations

– Make sure that all lines and ﬁttings are suitable for

the maximum permissible operating pressure of

the compressor.

21 Place of installation

– Set up the compressor on an even surface.

22 Supply hoses at pressures above 7 bar should be

equipped with a safety cable (e.g. a wire rope).

ADDITIONAL SAFETY INSTRUCTIONS

Safety instructions for working with compressed air

and blasting guns

• The compressor pump and lines can become very hot

during operation. Touching these parts will burn you.

• The air which is sucked in by the compressor must be

kept free of impurities that could cause ﬁres or explo-

sions in the compressor pump.

• When releasing the hose coupling, hold the hose cou-

pling piece with your hand. This way, you can protect

yourself against injury from the rebounding hose.

• Wear safety goggles when working with the blow-out

pistol. Foreign bodies or blown off parts can easily

cause injuries.

• Do not blow at people with the blow-out pistol and do

not clean clothes while being worn. Risk of injury!

Safety information for paint spraying

• Do not process any paints or solvents with a ﬂash point

below 55° C. There is a risk of explosion!

• Do not heat up paints or solvents. There is a risk of ex-

plosion!

• If hazardous liquids are processed, wear protective ﬁl-

ter units (face guards). Also, adhere to the safety infor-

mation provided by the manufacturers of such liquids.

• The details and designations of the Ordinance on Haz-

ardous Substances, which are displayed on the outer

packaging of the processed material, must be ob-

served.

• Additional protective measures are to be undertaken if

necessary, particularly the wearing of suitable clothing

and masks.

• Do not smoke during the spraying process and/or in the

work area. There is a risk of explosion! Paint vapors are

easily combustible.

• Never set up or operate the equipment in the vicinity of

a ﬁre place, open lights or sparking machines.

• Do not store or eat food and drink in the work area.

Paint vapors are harmful to your health.

• The work area must exceed 30 m

and sufﬁcient ven-

tilation must be ensured during spraying and drying.

Do not spray against the wind. Always adhere to the

regulations of the local police authority when spraying

combustible or hazardous materials.

• Do not process media such as white spirit, butyl alcohol

and methylene chloride with the PVC pressure hose.

These media will destroy the pressure hose.

Operating pressure vessels

• You must keep your pressure vessel in good working

order, operate the vessel correctly, monitor the vessel,

carry out necessary maintenance and repair work im-

mediately and meet the relevant safety precautions.

• The supervisory authority may enforce essential control

measures in individual cases.

• A pressure vessel is not allowed to be used if it has

faults or deﬁciencies that can endanger workers or third

parties.

• Check the pressure vessel for signs of rust and dam-

age each time before using. Do not use the compressor

with a damaged or rusty pressure vessel. If you discover

any damage, then please contact the customer service

workshop.

Do not lose these safety instructions

6. Technical data

Mains connection

230 V ~ 50 Hz

Motor rating W

1800

Operating mode

Compressor speed

2850 min

-1

Pressure vessel capacity (in liters)

Operating pressure

approx. 8 bar

Theoretical intake capacity (l/min)

approx. 260

sound power level L

97 dB(A)

uncertainty K

2,42 dB

Protection type

IP20

Weight of the unit in kg

approx. 27

Oil (15W 40) l

approx. 0,3

Max. altitude

(above mean sea level)

1000 m

The noise emission values were measured in accordance

with EN ISO 3744.

Wear hearing protection.

The effects of noise can cause a loss of hearing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PKO 270 A2 - IAN 275673 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info