Bedienungsanleitung Parkside PKO 270 A3 - IAN 285200 (Seite 9 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

668290

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

9GB/IE/NI

4. Intended use

The compressor is designed to generate compressed air for

compressed-air driven tools which can be driven with an air

volume of up to approx. 260 l/min (e.g. tire inﬂator, blow-

out pistol and paint spray gun). Due to the limited air output

it is not possible to use the compressor to drive tools with

very high air consumption (for example orbital sanders, die

grinders and hammer screwdrivers).

The equipment is to be used only for its prescribed purpose.

Any other use is deemed to be a case of misuse. The user

/ operator and not the manufacturer will be liable for any

damage or injuries of any kind caused as a result of this.

Please note that our equipment has not been designed for

use in commercial, trade or industrial applications. Our

warranty will be voided if the equipment is used in com-

mercial, trade or industrial businesses or for equivalent

purposes.

5. Safety information

m Attention! The following basic safety measures must be

observed when using electric tools for protection against

electric shock, and the risk of injury and ﬁre. Read all these

notices before using the electric tool and keep the safety

instructions for later reference.

m Attention! The following basic safety actions must be

taken when using this compressor in order to protect the us-

er from electric shocks and the risk of injury and ﬁ re. Read

and follow these instructions before using the equipment.

Safe work

1 Keep the work area orderly

– Disorder in the work area can lead to accidents.

2 Take environmental inﬂuences into account

– Do not expose electric tools to rain.

– Do not use electric tools in a damp or wet environ-

ment. There is a risk of electric shock!

– Make sure that the work area is well-illuminated.

– Do not use electric tools where there is a risk of

ﬁre or explosion.

3 Protect yourself from electric shock

– Avoid physical contact with earthed parts (e.g.

pipes, radiators, electric ranges, cooling units).

4 Keep children away

– Do not allow other persons to touch the equipment

or cable, keep them away from your work area.

5 Securely store unused electric tools

– Unused electric tools should be stored in a dry,

elevated or closed location out of the reach of

children.

6 Do not overload your electric tool

– They work better and more safely in the speciﬁed

output range.

7 Wear suitable clothing

– Do not wear wide clothing or jewellery, which can

become entangled in moving parts.

– Rubber gloves and non-slip shoes are recom-

mended when working outdoors.

– Tie long hair back in a hair net.

8 Do not use the cable for purposes for which it is not

intended

– Do not use the cable to pull the plug out of the

outlet. Protect the cable from heat, oil and sharp

edges.

9 Take care of your tools

– Keep your compressor clean in order to work well

and safely.

– Follow the maintenance instructions.

– Check the connection cable of the electric tool

regularly and have it replaced by a recognised

specialist when damaged.

– Check extension cables regularly and replace

them when damaged.

10 Pull the plug out of the outlet

– During non-use of the electric tool or prior to

maintenance and when replacing tools such as

saw blades, bits, milling heads.

11 Avoid inadvertent starting

– Make sure that the switch is switched off when

plugging the plug into an outlet.

12 Use extension cables for outdoors

– Only use approved and appropriately identiﬁed

extension cables for use outdoors.

– Only use cable reels in the unrolled state.

13 Remain attentive

– Pay attention to what you are doing. Remain

sensible when working. Do not use the electric tool

when you are distracted.

14 Check the electric tool for potential damage

– Protective devices and other parts must be care-

fully inspected to ensure that they are fault-free

and function as intended prior to continued use of

the electric tool.

– Check whether the moving parts function fault-

lessly and do not jam or whether parts are dam-

aged. All parts must be correctly mounted and

all conditions must be fulﬁlled to ensure fault-free

operation of the electric tool.

– Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is speciﬁed

in the operating manual.

– Damaged switches must be replaced at a cus-

tomer service workshop.

– Do not use any faulty or damaged connection

cables.

– Do not use any electric tool on which the switch

cannot be switched on and off.

15 Have your electric tool repaired by a qualiﬁed

electrician

– This electric tool conforms to the applicable safety

regulations. Repairs may only be performed by an

electrician using original spare parts. Otherwise

accidents can occur.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PKO 270 A3 - IAN 285200 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info