Bedienungsanleitung Parkside POF 1200 A1 - IAN 100129 (Seite 9 von 55) (Deutsch, Englisch, Holländisch, Schwedisch, Finnisch)

576627

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

9 GB

General power tool safety warnings / Start-upGeneral power tool safety warnings

be performed. Use of the power tool for

operations diﬀerent from those intended could

result in a hazardous situation.

5. Service

a) Have your power tool serviced by a

qualified repair person using only

iden-

tical replacement parts. This will ensure

that the safety of the power tool is maintained.

afety notices speciﬁc to routers

Only hold the power tool by the insu-

lated handle areas as the router may

touch the tool’s mains cable. Contact

with a live wire could cause metal parts of the

device to become live and lead to electric shock.

Fix and secure the work piece to a

stable surface using clamps or other

means. When only securing the work piece

by hand or against your body it will remain

unstable, which could lead to loss of control.

Wear a dust mask.

Supplementary Instructions

The permissible rotational speed of the

router tool must be at least as high as

the maximum speed indicated on the

electrical power tool. Parts used at higher

than permissible speeds may be ruined.

The router or other parts must fit pre-

cisely in the collet (shaft diameter 6/8)

of your electric power tool. Cutting tools

which do not ﬁt precisely in the collet of the

electric power tool turn unevenly, vibrate strong-

ly and can lead to a loss of control.

Always switch on the electrical power

tool before placing it against the work-

piece. There is also the risk of kickback if the

electric power tool becomes caught in the

work-piece.

Keep your hands away from the cut-

ting area and the router. Keep your

second hand on the additional handle

or on the engine housing. If you hold the

router with both hands, they cannot be injured

by the router.

Never use on metal objects, nails or

screws. The router can become damaged

and this may lead to higher vibrations.

Use suitable detectors in order to look

for hidden supply lines, or consult your

local power authority. Contact with elec-

tric lines can lead to ﬁre and electric shocks.

Damage to a gas line can lead to explosions.

Breaking a water line can cause damages.

Original accessories / tools

se only the accessories and attachment

detailed in the operating instructions,

or those which are compatible with

the device.

Start-up

Router set / Applications

Original attachment included in delivery:

To profile:

Round and proﬁle cutter ∅ 22 mm / R 6.3 mm

Round and proﬁle cutter ∅ 28.6 mm / R 9.5 mm

Round and proﬁle cutter ∅ 25 mm / R 4 mm

Hollow cutter ∅ 12.7 mm / R 6.3 mm

Hollow cutter ∅ 22 mm / R 6.3 mm

V-groove cutter ∅ 12.7 mm / Angle 90°

Bevel cutter ∅ 32 mm / Angle 45°

Flush cutter ∅ 12.7 mm

To connect:

Dovetail cutter ∅ 12.7 mm / Angle 14°

Slot cutter ∅ 6 mm

Slot cutter ∅ 12 mm

Slot cutter ∅ 16 mm

Note: Provided the router’s ball bearing has loos-

ened, tighten it with the Allen key provided in the

router set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside POF 1200 A1 - IAN 100129 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info