Bedienungsanleitung Parkside PPFSA 40-Li A1 - IAN 376667 (Seite 39 von 236) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Polnisch)

796059

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

GB IE

especially when starting the device. Al-

ways keep the hand on the additional

handle free.

2. Always hold the device with

both hands on the multifunction

handlebars. Always keep the device

at a suitable safety distance from the

body and maintain a stable body pos-

ture.

3. Always wear safety goggles.

4. Only use the device in daylight or

where there is good articial lighting.

5. Do not use the device in the rain or on

wet grass.

6. Check the device for damage before

use or after an impact, and repair if

necessary.

7. Do not use the device if the safety

equipment is damaged or incorrectly

installed.

8. Ensure that the motor’s ventilation slits,

the protective cover and cutting unit are

always free of dirt or residual material.

9. During the work process, always

ensure that there are no people or ani-

mals within a radius of at least 15 m.

Immediately switch off the machine if

anyone, especially children, gets within

range of the machine.

When using the device, stones

and other objects can be eject-

ed, which may lead to serious

injuries.

10. When the device is in operation, do

not get near to the moving parts (within

the cutting unit area). The cutting

head will keep rotating for a

few seconds after the device has

been switched off.

11. Before using the device, stones, twigs

and any other solid material must be

removed from the work area.

Only start the machine as described

in the manual. It must not be upside

nance and repairs. Spare parts are

available from our online shop (see

“Spare parts/Accessories”).

Warning! The use of other

mower heads as well as ac-

cessories and attachments that are

not expressly recommended can

endanger people and property. The

tool may only be used for the in-

tended purpose. Any use other

than for the intended purpose is

considered improper use. The user

is solely responsible for property

damage and personal injury result-

ing from such improper use; the

manufacturer bears no liability un-

der any such circumstance.

The manufacturer cannot be held li-

able if its machines are modied or

used improperly and if this results

in damage to people or property.

Attention! Even if the tool is used

properly, there is always a certain

level of residual risk that cannot

be excluded. Due the nature and

design of the tool, the following

potential hazards can be deduced:

• Contact with the unprotected spool (cut-

ting injuries)

• Reaching into the running spool (cutting

injuries)

• Hearing damage if adequate protection

is not worn

• Harmful dust or gas formation when us-

ing the device in closed rooms (nausea)

Additional safety rules

To prevent personal injury and

damage to property:

1. Caution! Always keep your hands

and feet away from the cutting area,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PPFSA 40-Li A1 - IAN 376667 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info