796059
40
Zoom out
Zoom in
Vorherige Seite
1/236
Nächste Seite
40
GB IE
down when starting or in the working
position.
Do not cross any gravel roads or paths
with the device running.
12. Extreme caution is required when ex-
tending the cutting line. There is a risk
of cutting injuries. After performing
these steps, the device must be brought
back into the correct working position
before being re-started.
13. Do not use any metallic cutting spools.
Note that the device will continue to
operate for a few seconds after you let
go of the switch.
14. Switch the motor off (on/off switch off)
if:
- Fuelling the device,
- Not using it,
- Leaving it unattended,
- Cleaning it,
- Transporting it from one location to
another,
- Removing or replacing the cutting
unit or adjusting the length of the
cutting line by hand.
15. Length of use and breaks
Prolonged use of the motorised device
can lead to problems with the blood
circulation in the hands caused by vi-
brations. You can however extend your
machine use time by wearing appropri-
ate gloves or by taking regular breaks.
Please ensure that if you are susceptible
to poor circulation, low outside temper-
atures or strong gripping forces while
working, this may reduce the length of
time for which you are able to work.
16. Prolonged use of this motorised device
can lead to hearing damage if appro-
priate hearing protection is not worn.
Wear personal hearing protec-
tion, e.g. ear plugs, to reduce the risk
of hearing damage.
17. Carry the strimmer by the upper and
lower shaft tube when it is switched off,
with the cutting unit pointing away from
your body in order to avoid injuries.
After the device has been switched off,
the motor head of the scythe is hot.
Make sure that you do not come into
contact with the motor head.
18. Regularly check whether the cutting
equipment is at a standstill when idling.
19. National regulations may specify an
age restriction for the user.
20. Be aware that the following circum-
stances can lead to damage to the de-
vice and serious injuries to the person
operating it:
- improper maintenance,
- use of non-compliant spare parts,
- the removal or modication of safety
devices.
21. Caution! Local regulations may restrict
use of the machine.
22. Always maintain the device and cutting
tool in a good condition.
23. Before use, check the device for loose
fastenings, fuel leaks and damaged
parts, such ascracks in the cutting at-
tachments.
24. Take breaks and change your working
position regularly.
25. Warning! There are sharp edges on the
string trimmer. Gloves need to be worn.
26. In order to detect signicant defects,
a visual inspection needs to be per-
formed before each use, after the de-
vice is dropped or if it suffers any kind
of impact.
27.Wear both non-slip foot protection
and protective clothing when using the
string trimmer.
28. Never use the machine if you are tired,
ill or under the inuence of alcohol or
other drugs.
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PPFSA 40-Li A1 - IAN 376667 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info