Bedienungsanleitung Parkside PSS 250 A1 - IAN 104446 (Seite 9 von 50) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

595334

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

9 GB/IE

General power tool safety warnings / OperationGeneral power tool safety warnings

on materials that give rise to dusts that are haz-

ardous to health, the sander must be connected

to a suitable external dust extraction device.

Wear protective glasses and a dust

mask!

Ensure sufficient ventilation when

working on plastics, paints, lacquers,

etc.

Do not soak materials or surfaces to be

worked with liquids containing solvents.

Avoid sanding of lead-based paints or

other materials that are hazardous to

health.

Material containing asbestos may not

be worked on. Asbestos is considered a

carcinogen.

The appliance is designed for dry sur-

face sanding of wood, plastic, metal

and smoothing compounds as well as

painted surfaces.

Never work on moistened materials

or wet surfaces. Water entering an electri-

cal device increases the risk of electric shock.

Always hold the appliance firmly with

two hands while working (see also

Fig. D, E).

Never support your hands next to or

in front of the device or on the surface

being worked as there is a risk of in-

jury in the event of slipping.

Always switch off the appliance and

allow the sanding sheet

to come to

a stop before setting down the oscil-

lating sander.

Always pull the power plug out of the

socket for all work pauses, before any

work on the appliance (e.g. changing

the sanding paper) and when not in

use.

The appliance must always be kept

clean, dry and free of oil or lubricat-

ing greases.

Original ancillaries / and

accessories

Only use accessories and tools that are

specified in the operating instructions.

The use of tools and accessories other than

those recommended in the operating instructions

could lead to an increased risk of personal in-

jury for you.

Operation

Switching On and Oﬀ

Switching on intermittent function:

Press the ON / OFF switch

Switching off intermittent function:

Release the ON / OFF switch

Switching on continuous operation:

Press the ON / OFF switch

, hold it pressed

and press the locking button

Switching off continuous operation:

Press the ON / OFF switch

then release it

again.

Setting the oscillation speed

You can set the desired oscillation speed as needed

with the oscillation speed selector

The required oscillation speed depends on the ma-

terial being worked and can be determined through

practical tests.

Attaching a sanding sheet

Before performing work on the

appliance, always disconnect the power.

NOTE: Before attaching a new sanding sheet

remove dust and dirt from the sanding plate

Sanding sheets with hook and loop

fastening:

Fix one side of the sanding sheet

ﬂush with

one side of the backing plate

Then attach the sanding sheet

to the back-

ing plate

and press it ﬁrmly into place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSS 250 A1 - IAN 104446 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info