Bedienungsanleitung Parkside PSSSA 20-Li B2 - IAN 354641 (Seite 9 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

786096

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

GB IE NI

increase the risk of electric shock.

e) When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

f) If operation of the power tool in

a damp environment is unavoi-

dable, please use a residual cur-

rent circuitry. The use of a residual

current circuitry reduces the risk of an

electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are

doing and use common sense

when operating a power tool.

Do not use a power tool while

you are tired or under the inu-

ence of drugs, alcohol or medi-

cation. A moment of inattention white

operating power tools may result in

serious personal injury.

b) Use personal protective equip-

ment. Always wear eye protec-

tion. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting.

Ensure the switch is in the off-

position before connecting to

power source and/or battery

pack, picking up or carrying the

tool. Carrying power tools with your

nger on the switch or energising pow-

er tools that have the switch on invites

accidents.

d) Remove any adjusting key or

wrench before turning the pow-

er tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear

loose clothing or jewellery.

Keep your hair, clothing and

gloves away from moving

parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If dust extraction and collection

devices can be installed, make

sure that these are connected

and used correctly. Use of dust coll-

ection can reduce dust-related hazards.

h) Do not allow yourself to be

lulled into a false sense of se-

curity and do not disregard the

safety rules for power tools,

even if you are familiar with the

power tool after using it many

times. Careless action can lead to

serious injuries within a fraction of a

second.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

c) Remove the plug from the wall

socket and/or remove the re-

chargeable battery before you

change the device’s settings,

change accessory parts or put

away the power tool. Such pre-

ventive safety measures reduce the risk

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSSSA 20-Li B2 - IAN 354641 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info