Bedienungsanleitung Parkside PSSSA 20-Li B2 - IAN 354641 (Seite 11 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

786096

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

GB IE NI

of the power tool is maintained.

b) Never repair damaged batte-

ries. All battery repairs should be

carried out by the manufacturer or au-

thorised customer service centres only.

Safety information for

sawing back and forth

• Hold the electric tool by the in-

sulated gripping surfaces when

performing work in which the

cutting tool may come into con-

tact with hidden wiring. Contact

with a live wire can also cause a

charge in metal parts of the device and

result in an electric shock.

• Fasten and secure the workpie-

ce by means of clamps or with

another method on a stable un-

derground. If you hold the workpiece

only with your hand or against your

own body, it will stay instable and this

can lead to a loss of control.

• Do not use any accessories

that are not recommended by

PARKSIDE. This can result in electric

shock or re.

• Keep hands away from the sawing

area. Do not reach underneath the

workpiece. Upon contact with the bla-

de there is a risk of injury.

• Move the power tool against the work-

piece only when it is turned on. Other-

wise, there is a risk of kickback if the

attachment tools jam in the workpiece.

• Make sure that the footplate is resting

securely on the workpiece during sa-

wing. A tilted saw blade may break or

cause a kickback.

• After you have nished work, turn the

power tool off and do not pull the saw

blade out of the cut until it has come to

a standstill. In this way you will avoid

any kickback and can safely put down

the power tool.

• Use only undamaged saw blades in

perfect condition. Bent or blunt blades

can break, adversely affect the cut or

cause kickback.

• Do not brake the saw blade after swit-

ching the device off by applying side

pressure. The saw blade may be dama-

ged, break or cause a kickback.

• Use suitable detectors in order to nd

hidden supply lines or consult the local

utility company.

Contact with electric cables can lead to

re and electric shock.

Damage to a gas pipe can cause an

explosion. Penetration into a water line

causes property damage.

• Check the material to be pro-

cessed for foreign bodies, such

as nails, screws etc. which must

be removed.

• Secure the workpiece. A workpie-

ce that is retained with clamping appli-

ances or a vice is held more securely

than with your hand. Do not support

the workpiece by hand or foot.

• Hold the power tool tightly while wor-

king and ensure a secure footing.

• Do not touch any objects or the

ground with the saw running.

There is a risk of kickback.

• Switch the appliance off immedi-

ately if the saw blade jams. Force

apart the saw cut and pull the

blade out carefully. This can lead to

loss of control over the power tool.

• Do not saw any materials (e.g.

lead-based paints and coatings

or materials containing asbes-

tos) whose dust can be harmful.

• Wait until the power tool has stopped

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSSSA 20-Li B2 - IAN 354641 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info