Bedienungsanleitung Parkside PWS 125 A1 - IAN 102828 (Seite 11 von 91) (Deutsch, Englisch, Holländisch, Dänisch, Schwedisch, Finnisch)

576693

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

PWS 125 A1

■ Make sure that abrasive consumables and

tools are attached in accordance with the

manufacturer’s instructions and advice.

Otherwise they could become detached from

the device and result in injury and / or damage

to property.

■ Ensure that any spacers supplied and

required for the use of certain abrasive con-

sumables and tools are installed.

■ Do not use separate reducing bushes or

adapters in order to make grinding discs with

a larger bore ﬁ t.

■ When using abrasive consumables and tools

with a threaded insert make sure that the

tread is long enough for the spindle length.

Otherwise the grinding discs could become

detached from the device and result in injury

and / or damage to property.

■ Do not allow the end of the spindle to contact the

base of the hole in the abrasive consumable.

■ Do not work in areas where there may be

concealed electricity cables or gas or water

pipes. Use a suitable detector or ask your

local utility service providers. Contact with

electricity cables can lead to ﬁ re or electric

shock. Damaging a gas pipe can lead to an

explosion. Penetration of a water pipe can lead

to property damage or to electric shock.

WARNING! NOXIOUS FUMES!

► Working with harmful / noxious dusts represents

a risk to the health of the person operating the

device and to anyone near the work area.

■ When working on metal for longer periods,

connect the tool to a suitable external extrac-

tion system.

■ Ensure that there is adequate ventilation

when working on plastic, paint, varnish etc.

■ Do not soak the materials or the surface you

are about to work on with liquids containing

solvents.

■ DANGER OF INJURY! Wear close-ﬁ tting

clothing and keep long hair inside a hairnet

or suitable headwear.

■ For safety reasons this device must always be

used with the auxiliary handle in place.

■ The adjustable disc guard cover must al-

ways be in place when working with roughing,

grinding or cutting discs. Otherwise there could

be danger of injury.

■ Use the vacuum dust extraction facility if your

work generates high amounts of dust. Use suction

devices particularly approved for the purpose.

■ Use permitted consumables and tools only.

Check that the speed given on the discs is great-

er or equal to the rated speed of the device.

■ Take note of the direction of rotation and

always hold the device in such a way that the

sparks and grinding debris are thrown away

from your body. Otherwise there could be

danger of injury.

■ Make sure that the dimensions of the disc are

suitable for the device and that the disc is of

a type that ﬁ ts properly on to the mounting

ﬂ ange .

Working procedures

NOTE

►

Grinding tools should only be used for the

recommended applications. Otherwise, they

can break, be damaged or cause injuries.

Rough grinding:

Never use cutting discs for rough

grinding!

■ Move the angle grinder with moderate pres-

sure back and forth over the workpiece.

■ For soft material, move the rough grinding

disc at a ﬂ at angle over the workpiece; for

hard material at a slightly steeper angle.

Abrasive cutting:

Never use rough grinding discs for

cutting!

■ Use only tested ﬁ bre-reinforced cutting or

grinding discs that are approved for a circum-

ferential speed of no less than 80 m/s.

IB_102828_PWS125A1_LB3.indb 8 22.08.14 11:48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PWS 125 A1 - IAN 102828 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info