Bedienungsanleitung Parkside PWS 125 A1 - IAN 102828 (Seite 12 von 91) (Deutsch, Englisch, Holländisch, Dänisch, Schwedisch, Finnisch)

576693

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

PWS 125 A1

CAUTION!

The grinder continues running after being turned

oﬀ . Do not try to brake it by applying lateral

counterpressure.

■ Immobilise the workpiece securely. Use clamps/

vices to hold the workpiece ﬁ rmly in place.

This is much safer than simply holding it in your

hand.

■ Always switch oﬀ the appliance before putting

it away and wait for the appliance to come to

a complete standstill.

■ Release the ON/OFF switch immediately in

the event of a power failure or when the plug

is pulled out. Move it into the OFF position.

This prevents an uncontrolled restart.

■ Use the appliance only for dry cutting or

sanding.

■ The additional handle

must be mounted on

the appliance for all work.

■ Materials containing asbestos may NOT be

processed. Asbestos is a known carcinogen.

Tip! This symbol indicates proper

behaviour!

DANGER! GUIDE THE APPLIANCE

THROUGH THE WORKPIECE IN

REVERSE ROTATION.

► In the opposite direction there is a risk of

kickback. The appliance can be pushed out

of the cut.

■ Always switch the appliance on before ap-

plying it to the workpiece. After completing

the task, lift the appliance from the work piece

and then switch it oﬀ .

■ Always hold the appliance ﬁ rmly with two

hands while working. Ensure that your stance

is secure and stable.

■ For an optimum grinding eﬀ ect, move the ap-

pliance evenly at an angle of 15° to 30° (be-

tween grinding disc and workpiece) backwards

and forwards.

■ When working on angled surfaces, do not

exert great force on the workpiece. If the

rotational speed drops signiﬁ cantly, you must

reduce the pressure exerted to allow safe and

eﬀ ective working. If the appliance suddenly

brakes completely or jams, it must be switched

oﬀ immediately.

■ Cutting: Work with a moderate feed and do

not tilt the cutting disc.

■ Roughing and cutting discs become very

hot – let them cool down completely before

touching them.

■ Never use the appliance for purposes other

than the ones for which it was designed.

■ Always make sure that the appliance is

turned oﬀ before plugging it into the wall

socket.

■ In case of danger, remove the plug from the

socket immediately. Ensure that the appliance

and the power socket are easily and quickly

accessible in the event of an emergency.

■ Always remove the plug from the power

socket during work breaks, when adjusting

the appliance and when it is no longer in use.

The appliance must always be kept clean, dry

and free from oil or grease.

■ Remain alert at all times! Always pay attention

to what you are doing and act with common

sense. Never use the appliance when you are

distracted or don’t feel well.

Operation

Adjusting the blade guard

WARNING – RISK OF INJURY!

► Always remove the plug from the power socket

before working on the appliance. To adjust

the blade guard , you do not need to re-

move the screws

but simply loosen them.

IB_102828_PWS125A1_LB3.indb 9 22.08.14 11:48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PWS 125 A1 - IAN 102828 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info