Bedienungsanleitung Parkside PZKS 1500 A1 - IAN 273098 (Seite 11 von 64) (Deutsch, Englisch, Holländisch, Französisch)

706378

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

6GB/IE

– 7KHJHQHUDWLRQRIQRLVHLVLQÀXHQFHGE\YDULRXV

factors, including the characteristics of saw

blades, condition of saw blade and electric

tool. Use saw blades which were designed for

reduced noise development, insofar as possible.

Maintain the electric tool and tool attachments

regularly and if necessary, initiate repairs in

order to reduce noise.

– Report faults on the electric tool, protective

devices or the tool attachment to the person

responsible for safety as soon as they are dis-

covered.

3 Safe work

- Make sure that a suitable saw blade for the mate-

rial to be cut is selected.

- Never use the machine to cut other materials as

VSHFL¿HG

- To transport the machine follow the procedure

of point 9.

When transporting the electric tool, only use the

transport devices. Never use the protective de-

vices for handling or transport.

- Operate the machine only if the protective devices

are functional, in good condition and in the correct

position.

- 7KHÀRRUDURXQGWKHPDFKLQHPXVWEHOHYHOFOHDQ

and free of loose particles, such as chips and cut-

ting residues.

- Only use saw blades for which the maximum

permissible speed is not lower than the maximum

spindle speed of the machine and which are suit-

able for the material to be cut.

- Be sure to only use spacers and spindle rings

VSHFL¿HGE\WKHPDQXIDFWXUHUDVVXLWDEOHIRUWKH

intended purpose.

- Attention! Do not replace the laser by a different

type.

Repairs may only be carried out by the manufac-

turer or an authorized representative.

- Do not remove any cutting residues or other parts

of workpieces from the cutting zone while the ma-

chine is running and the saw unit is not at rest.

Instructions for proper and safe sawing:

a) Clamp the workpiece always at the saw table

¿UPO\7KHUHIRUHSOHDVHXVHWKHVXSSOLHGFODPSLQJ

device.

b) Make sure that the machine is secured before

each sawing;

c) If necessary attach the machine to a workbench

or the like.

Fasten the machine to the workbench, using the

KROHVDWWKH¿[HGVDZWDEOH

d) Support long workpieces (e.g. with a roller table)

to prevent them sagging at the end of a cut.

e) Make sure that the saw blade does not touch

the rotary table in any position by pulling out the

mains plug and rotating the saw blade by hand in

the 45° and 90° position. If necessary, readjust the

saw head.

Warning! This electric tool generates an electromag-

QHWLF¿HOGGXULQJRSHUDWLRQ7KLV¿HOGFDQLPSDLUDFWLYH

or passive medical implants under certain conditions. In

order to prevent the risk of serious or deadly injuries, we

recommend that persons with medical implants consult

with their physician and the manufacturer of the medical

implant prior to operating the electric tool.

SAFETY INSTRUCTIONS FOR THE HANDLING OF

SAW BLADES

1 Only use insertion tools if you have mastered their

use.

2 Observe the maximum speed. The maximum

VSHHGVSHFL¿HGRQWKHLQVHUWLRQWRROPD\QRWEH

H[FHHGHG,IVSHFL¿HGREVHUYHWKHVSHHGUDQJH

3 Observe the motor / saw blade direction of rota-

tion.

4 Do not use any insertion tools with cracks. Sort out

cracked insertion tools. Repairs are not permitted.

5 Clean grease, oil and water off of the clamping

surfaces.

6 Do not use any loose reducing rings or bushes for

the reducing of holes on saw blades.

7 0DNHVXUHWKDW¿[HGUHGXFHUULQJVIRUVHFXULQJWKH

insertion tool have the same diameter and have at

least 1/3 of the cutting diameter.

8 0DNHVXUHWKDW¿[HGUHGXFHUULQJVDUHSDUDOOHOWR

each other.

9 Handle insertion tool with caution. They are ideally

stored in the originally package or special contain-

ers. Wear protective gloves in order to improve

grip and to further reduce the risk of injury.

10 Prior to the use of insertion tools, make sure that

all protective devices are properly fastened.

11 Prior to use, make sure that the insertion tool

meets the technical requirements of this electric

tool and is properly fastened.

12 Only use the supplied saw blade for cutting wood,

never for the processing of metals.

Attention: Laser radiation

Do not stare into the beam

Class 2 laser

Protect yourself and you environment from acci-

dents using suitable precautionary measures!

• Do not look directly into the laser beam with unpro-

tected eyes.

• Never look into the path of the beam.

• 1HYHUSRLQWWKHODVHUEHDPWRZDUGVUHÀHFWLQJVXU-

faces and persons or animals. Even a laser beam

with a low output can cause damage to the eyes.

• &DXWLRQPHWKRGVRWKHUWKDQWKRVHVSHFL¿HGKHUH

can result in dangerous radiation exposure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PZKS 1500 A1 - IAN 273098 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info