Bedienungsanleitung Parkside PZKS 1500 B2 - IAN 280657 (Seite 97 von 106) (Deutsch, Englisch, Holländisch, Französisch)

706372

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

GB / IE / NI

Safety measures must be defined to protect

the operator. They must be based on an

assessment of exposure during actual usage

conditions (all parts of the operating

cycle must be accounted for, e.g. periods

when the power tool is switched off and

when it is switched on, but not operating

under load).

Reduce the vibration risk by

- wearing protective gloves during use and

- limiting the working time and reducing

the actual operation time.

Residual risks

The machine has been built according to

the state of the art and the recognised

technical safety requirements.However,

individual residual risks can arise during

operation.

•Healthhazardduetoelectricalpower,

with the use of improper electrical

connection cables.

•Furthermore,despiteallprecautions

having been met, some non-obvious

residual risks may still remain.

•Residualriskscanbeminimisedifthe

"safety instructions" and the "Proper use"

are observed along with the whole of the

operating instructions.

•Donotloadthemachineunnecessarily:

excessive pressure when sawing will

quickly damage the saw blade, which

results in reduced output of the machine

in the processing and in cut precision.

•Whencuttingplasticmaterial,please

always use clamps: the parts which

should be cut must always be fixed

between the clamps.

•Avoidaccidentalstartingofthemachine:

the operating button may not be pressed

when inserting the plug in an outlet.

•Usethetoolthatisrecommendedinthis

manual. In doing so, your mitre saw

provides optimal performance.

•Handsmayneverentertheprocessing

zone when the machine is in operation.

Release the handle button and switch off

the machine prior to any operations.

7. Before starting the

equipment

•Theequipmentmustbesetupwhereit

can stand securely. Secure the machine

on a workbench or a stand with 4 screws

through the holes in the fixed saw table

(16).

•Allcoversandsafetydeviceshavetobe

properly fitted before the equipment is

switched on.

•Itmustbepossibleforthebladetorun

freely.

•Whenworkingwithwoodthathasbeen

processed before, watch out for foreign

bodies such as nails or screws, etc.

•BeforeyoupresstheON/OFFswitch

check that the saw blade is fitted

correctly. Moving parts must run

smoothly.

•Beforeyouconnecttheequipmenttothe

power supply make sure the data on the

rating plate are dentical to the mains

data.

8. Attachment and operation

8.1 Attaching the saw

(Fig1/2/3/4/5)

Avoid unintentional starting of the

machine. During assembly and for all

work on the machine, the power plug

must not be connected to the mains

supply.

- Attach the carry handle (22) to the

machine head (4) with 2 x screws.

Before starting the equipment/Attachment and operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PZKS 1500 B2 - IAN 280657 Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info