Bedienungsanleitung Parkside PZKS 1500 B2 - IAN 280657 (Seite 101 von 106) (Deutsch, Englisch, Holländisch, Französisch)

706372

101

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

GB / IE / NI

coatings, some wood types, minerals and

metal can be harmful to one’s health.

Touching or breathing-in the dust can cause

allergic reactions and/or lead to respiratory

infections of the user or bystanders.

Certain dust, such as oak or beech dust,

is considered carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

- Always use dust extraction.

- Provide for good ventilation of the

working place.

- It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Prevent dust accumulation at the

workplace.

Dust can easily ignite.

The dust/chip extraction can be blocked by

dust, chips or workpiece fragments.

- Switch the machine off and pull the mains

plug from the socket outlet.

- Wait until the saw blade has come to a

complete stop.

- Determine the cause of the blockage and

correct it.

External Dust Extraction

For dust extraction, a vacuum hose (size

Ø 35 mm) can also be connected to the dust

extraction spout.

- Connect the vacuum hose with the dust

extraction spout .

The vacuum cleaner must be suitable for

the material being worked.

When vacuuming dry dust that is

especially detrimental to health or

carcinogenic, use a special vacuum

cleaner.

The saw is equipped with a sawdust bag (21)

for sawdust and chips.

Squeeze together the metal ring on the dust

bag and attach it to the outlet opening in the

motor area.

The sawdust bag (21) can be emptied by

means of a zipper at the bottom.

8.12 Changing the saw blade

(Fig. 1/17/18/19/20)

• Allowthemachinehead(4)torisetothe

upright position.

• Loosenthecoverplatescrewwiththe

4 mm Allen key (e).

WARNING!

Do not remove this screw.

• Rotatethecoverplate(20)upwardand

raise the movable blade guard to the

upper position to expose the flange bolt

(35).

• Placethe6mmAllenkey(d)overthe

flange bolt.

• Pressthesawshaftlock(37),holding

it in firmly while turning the 6mm Allen

key (d) clockwise. The shaft lock will be

engage after turning the 6mm Allen key.

• Continuetoholdthesawshaftlockto

keep it engaged, while turning the blade

Allen key clockwise to loosen the flange

bolt (35).

• Removetheflangebolt(35)andthe

outer flange (36).

• Takethesawblade(6)offtheinner

flange (38) and pull out downwards.

NOTE:

Pay attention to the pieces

removed, noting their position and

direction they face.

• Carefullycleantheflangebolt(35),outer

flange (36) and inner flange (38).

• Fitandfastenthenewsawblade(6)in

reverse order.

•

Important!

The cutting angle of the teeth,

in other words the direction of rotation of

the saw blade (6) must coincide with the

direction of the arrow on the housing.

• Rotatethecoverplate(20)downward

and lower the movable blade guard to

the lower position to cover the flange bolt

(35).

Attachment and operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PZKS 1500 B2 - IAN 280657 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info