Bedienungsanleitung Parkside PZKS 1500 B2 - IAN 295934 (Seite 98 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

706364

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

93GB / IE / NI

- This electric tool complies with the

applicable safety rules. Repairs should

only be carried out by qualified persons

using original spare parts, otherwise this

may result in considerable danger to the

user.

ADDITIONAL SAFETY

INSTRUCTIONS

1 Safety precautions

WARNING!

Do not use saw blades

which are damaged or deformed.

- Replace the table insert when worn.

- Only use saw blades recommended

by the manufacturer which conform to

EN 847-1.

- Do not use saw blades made of high

speed steel (HSS steel).

- Wear suitable personal protective

equipment when necessary, this could

include:

- Hearing protection to reduce the risk of

induced hearing loss,

- Eye protection. Sparks generated during

work or splinters, chippings and dust

coming from the device can lead to loss

of eyesight.

- Respiratory protection to reduce the risk

of inhalation of harmful dust,

- Gloves for handling saw blades and

rough materials. Carry saw blades in a

holder whenever practical.

- Always connect the saw to a dust

collecting device.

The emission of dust is influenced, among

other things, by the type of material to

be processed, the significance of local

separation (collection or source), and the

correct setting of the hood/guide plates/

guides.

2 Maintenance and repair

- Pull out the mains plug for any adjustment

or repair tasks.

- The generation of noise is influenced

by various factors, including the

characteristics of saw blades, condition

of saw blade and electric tool. Use saw

blades which were designed for reduced

noise development, insofar as possible.

Maintain the electric tool and tool

attachments regularly and if necessary,

initiate repairs in order to reduce noise.

- Report faults on the electric tool,

protective devices or the tool attachment

to the person responsible for safety as

soon as they are discovered.

3 Safe Operation

- Make sure that a suitable saw blade for

the material to be cut is selected.

- Never use the machine to cut other

materials as specified.

- To transport the machine follow the

procedure of point 9.

When transporting the electric tool, only

use the transport devices. Never use

the protective devices for handling or

transport.

- Operate the machine only if the

protective devices are functional, in good

condition and in the correct position.

- The floor around the machine must be

level, clean and free of loose particles,

such as chips and cutting residues.

- Only use saw blades for which the

maximum permissible speed is not lower

than the maximum spindle speed of the

machine and which are suitable for the

material to be cut.

- Be sure to only use spacers and spindle

rings specified by the manufacturer as

suitable for the intended purpose.

- Attention! Do not replace the laser by

a different type.

Safety information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PZKS 1500 B2 - IAN 295934 Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info