Bedienungsanleitung Parkside XQ 600 - KH 3168 (Seite 7 von 12) (Englisch)

558712

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

9 GB/IE/CY

Look after the device carefully. Check that

moving parts are working properly and

move freely. Check for any parts that are

broken or damaged enough to detrimen-

tally affect the functioning of the device.

Have damaged parts repaired before

you use the device. Many accidents have their

origins in poorly maintained electrical power tools.

Keep cutting tools clean and sharp. Care-

fully maintained cutting tools with sharp cutting edg-

es are less likely to jam and are easier to control.

f) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this

particular type of device. In doing this,

take into account the working condi-

tions and the task in hand. The use of

electrical power tools for purposes other than

those intended can lead to dangerous situations.

Safety advice relating

speciﬁcally to random

orbital sanders

J When working in outside areas, protect your-

self against leakage current by ﬁtting an FI pro-

tection switch with a max. activation rating of

30 mA.

J Secure the workpiece ﬁrmly. Use clamps or a

vice to ﬁrmly hold the workpiece. This results

in a safer grip than with your hand.

J Under no circumstances should you place your

hands next to or in front of the appliance or on

the area to be worked, you could be seriously

injured if you slip or stumble.

J In event of danger, immediately remove the

power plug from the socket.

J Always run the power cable away from the

appliance to the rear.

J FIRE HAZARD DUE TO FLYING SPARKS!

When sanding metals, there is a risk of ﬂying

sparks. For this reason, always make certain

that no one is at risk and that no ﬂammable

materials are located near the working area.

WARNING!

TOXIC VAPOURS!

The working of materials that can produce harm-

ful / toxic dusts presents a health risk for the oper-

ator and for people located in the close vicinity.

Wear safety glasses and a dust

protection mask!

J When working for extended periods on wood

and, in particular, materials that produce dusts

that are hazardous to health, connect the appli-

ance to an appropriate external suction device.

J Provide for suﬃcient ventilation when working

plastics, varnishes and paints.

J Do not soak materials or surfaces to be worked

with liquids containing solvents. The heat gene-

rated during sanding can give rise to vapours

that are toxic or hazardous to health.

J Avoid sanding lead-based paints or other

materials that are hazardous to health.

J Material containing asbestos may not be worked.

Asbestos is considered to be a carcinogen.

J Avoid contact with the moving sanding sheet.

J Use the appliance only with a sanding sheet in

place.

J Never use the appliance for purposes other

than those intended and only with original

components / accessories.

J Introduce the appliance to the work piece with

it switched on. On task completion, lift the appli-

ance from the work piece and then switch it oﬀ.

J Permit the switched oﬀ appliance to come to a

complete standstill before putting it down.

J The appliance must always be kept clean, dry

and free of oil or grease.

Original accessories / tools

J Use only the accessories detailed in the operat-

ing instructions. The use of inserted tools or ac-

cessories other than those recommended in the

operating instructions could lead to you suﬀer-

ing an injury.

General safety advice

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside XQ 600 - KH 3168 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside XQ 600 - KH 3168

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info