Bedienungsanleitung Parkside XQ 600 - KH 3168 (Seite 9 von 12) (Englisch)

558712

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

11 GB/IE/CY

To switch off intermittent operation mode:

j Release the On / Oﬀ switch

Switching on for sustained operation:

j Press the On / Oﬀ switch

and, at the same

time, secure it with the locking button

Switching off after sustained operation:

j Press the On / Oﬀ switch

and then release it.

Rotation preselection:

j Select the desired rotation with the adjusting

wheel rotation speed selector

DUO-START function / Reduced idling

rotation speed:

The appliance is ﬁtted with a reducer for the rotation

speed when idling.The full motor performance resp.

the preselected rotation speed becomes available with

the additional activation of a DUO-START switch.

j Activate either the Front switch

DUO-START

the Hand switch

DUO-START

(see Figs. A, B, C).

This makes possible a gentler touch down onto the

work piece.

Note: The front switch

DUO-START

springs back

into the starting position on being released.

Dust suction

WARNING!

FIRE HAZARD! A risk of ﬁre

exists when working with electrical appliances that

have a dust collection box or can be connected to

an external collection unit via a dust suction adapt-

er! Under unfavourable conditions, such as ﬂying

sparks, grinding of metal or metal remnants in

wood, the wood dust in the dust sack (or in the dust

sack of a vacuum cleaner) can ignite.This can hap-

pen especially if the wood dust has paint particles on

it or is mixed with other chemical substances and

the material being sanded is hot after extensive

working. You should therefore avoid an overheat-

ing of the items being sanded, as well of as the ap-

pliance itself, and always empty the dust collection

box or the dust bag of the suction unit before work

pauses.

Wear a dust protection mask!

WARNING!

Before carrying out work on the

appliance, always remove the plug from the power

socket.

Installing the suction ring:

The suction ring

makes possible an optimal dust

suction.

j Place the suction ring

in the housing guide.

Close the clamp bracket on the housing rear side.

Dust suction with the dust collection box:

j Slide the dust collection box

onto the adap-

tor opening on the appliance rear side.

Emptying the dust collection box:

j Press the release buttons

on both sides,

then remove the dust collection box

from

the appliance.

Note: To maintain an optimal suction perform-

ance, empty the dust collection box

regularly.

Adapter for external suction (Fig. D)

Connection:

j Slide the adaptor for external suction

exactly

and completely onto the adapter opening on the

appliance rear side.

j Slide the tube of an authorised dust collection

unit (e.g. a workshop vacuum cleaner) onto the

adaptor for external suction

Removal:

j Remove the tube of the dust collection unit from

the adaptor for external suction

j Press both release buttons and remove the

adaptor for external dust collection

from

the appliance.

Commissioning

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside XQ 600 - KH 3168 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside XQ 600 - KH 3168

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info