Bedienungsanleitung Partner P33XT (Seite 6 von 15) (Deutsch, Englisch, Französisch, Spanisch)

518732

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

S Keep a good,firmgripon the saw with both

hands when the engine is running and

don’t let go. A firm grip willhelp you reduce

kickback and maintain control of the saw.

Keep the fingers of your left hand encir-

cling and your left thumb under the front

handlebar. Keep your right hand com-

pletely around the rear handle whether

your are right handed or left handed. Keep

your left arm straight with the elbow

locked.

S Position your left hand on the front handle-

bar so it is in a straight line with your right

hand on the rear handle when making

bucking cuts. Never reverse right and left

hand positions for any type of cutting.

S Standwithyourweightevenly balanced on

both feet.

S Stand slightly to the left side of the saw to

keep your body from being in a direct line

with the cutting chain.

S Do not overreach. You could be drawn or

thrown off balance and lose control of the

saw.

S Do not cut above shoulderheight. It is dif fi-

cult to maintain control of saw above

shoulder height.

KICKBACK SAFETY FEATURES

WARNING:The following features are

included on your saw to help reduce the hazard

of kickback; however , such features will not to-

tally eliminate this dangerous reaction. As a

chain saw user , do not rely only on safety de-

vices. Y ou must follow all safety precautions,

instructions, and maintenance in this manual to

help avoid kickback and other forces which

can result in serious injury.

S Reduced--Kickback Guide Bar , designed

wit h asma l l r a d i u stip which reduce s th esize

of the kickback danger zone on the bar tip. A

Reduced--Kickback Guide Bar has been

demonstrated to significantly reduce the

number and seriousness of kickbacks.

Small Radius Tip

Reduced Kickback

Symmetrical

Guide Bar

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a

contoured depth gauge and guard link

which deflect kickback force and allow

wood to gradually ride into the cutter.

Low-Kickback Chain

Contoured Depth Gauge

Elongated Guard Link

Deflects Kickback

Force And Allows

Wood To Gradually

Ride Into Cutter

S Handguard, designed to reduce the

chance of your left hand contacting the

chain if your hand slips offthe front handle-

bar.

S Position of front and rear handlebars, de-

signed with distance between handlesand

“in-line” with each other. The spread and

“in-line” position of the hands provided by

this design work together to give balance

and resistance in controlling the pivot of

the saw back toward the operator if kick-

back occurs.

WARNING: DO NOT RELY UPON

ANY OF THEDEVICES BUILT INTOYOUR

SAW. YOU SHOULD USE THE SAW

PROPERLY AND CAREFULLY TO AVOID

KICKBACK. Reduced--kickback guide bars

and low--kickback saw chains reduce the

chance and magnitude of kickback and are

recommended. Yoursaw has a lowkickback

chain and bar as original equipment. Re-

pairs on a chain brake should be made by an

authorized servicing dealer .Take your unitto

the place of purchase if purchased from a

servicing dealer, or to the nearest authorized

master service dealer.

S T ip contact in some cases may cause a

lightning fast reverse REACTION, kicking

the guide bar upand back toward theoper-

ator.

S Pinching the saw chain along the top ofthe

guide bar may push the guide bar rapidly

back toward the operator.

S Either of these reactions may cause you to

lose control of the saw which could result

in serious injury. Do not rely exclusively

uponthe safety devices built into your saw.

ASSEMBLY

Protective gloves (not provided) should be

worn during a ssembly.

A TT A CH IN G THE BUMPER SPIKE

The bumper spike may be used as a pivot

when making a cut.

1. Loosen and remove thechain brake nuts

and the chain brake from the saw .

2. Attach the bumper spike with the two

screws as illustrated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Partner P33XT Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info