Bedienungsanleitung Peaq PDR180BT (Seite 15 von 107) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

783290

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

ENGLISH

DAB RADIO

When the radio is switched on for the ﬁrst time, it will

automatically do a full scan of DAB/DAB+ stations.

The list of stations is then stored, eliminating the

need for another full scan when the radio is turned

on the next time.

When the scan is complete, the stations are stored

in alphabetical order. The ﬁrst available station will

be played back.

Note

If there is no DAB reception at any time, change

the position of the unit or adjust the antenna. Press

Scan to start a new search.

Changing DAB/DAB+ stations

1. Turn the Tune dial to navigate available DAB/

DAB+ stations.

2. To conﬁrm, press Select.

Storing DAB stations

Press and hold the button Menu in DAB mode until

“Full scan” appears on the display. Press Select

to conﬁrm.

The unit scans all available DAB/DAB+ stations

and plays the ﬁrst available station.

Note

New stations and services are added to the stored

DAB/DAB+ stations. In order to make new DAB/

DAB+ stations and services available on your ra-

dio, run a full scan at regular intervals.

Displaying station information

1. Select a DAB station.

2. During DAB/DAB+ radio playback, press Menu

repeatedly to display the following information

(if available):

• Radio station name

• Frequency

• Signal frequency error

• Audio state and bit rate

• Time

• Date

• Radio text

• Signal strength

• Programme type

Storing DAB stations

You can store up to 30 preset DAB/DAB+ stations.

1. Select the desired station.

2. Press and hold Preset until “Preset store” is

shown on display.

3. Turn the Tune dial to preset a number from

1-30. Press Select to conﬁrm the selection.

4. The preset number of the stored station is dis-

played.

5. Repeat steps 1 to 4 to store more DAB/DAB+

stations.

Selecting preset DAB stations

1. Press Mode to select DAB/DAB+ stations.

2. Press Preset to access the Preset menu.

3. Turn the Tune dial to select a preset number

and conﬁrm your selection by pressing Select.

Using the DAB/DAB+ menus

In DAB mode press Menu until display shows [Full

scan] and use Tune to browse the menu options.

To conﬁrm your selection press Select every time.

• [Full scan]

Searches for all available DAB/DAB+ stations.

• [Manual tune]

Manual tuning adjustment, for example align-

ing the antenna or adding stations.

• [Prune]

Removes all invalid stations from the station

list.

• [System]

System setting

FM RADIO

Selecting FM stations

1. Press Mode to select FM stations.

2. The radio plays the last station selected.

Selecting FM station frequencies

1. Select a FM station.

2. Manual frequency selection.

Turn the Tune dial to change the frequency at

intervals of 0.05 MHz.

3. Automatic frequency selection.

Press Select and the radio will stop searching

once an active station has been found.

IM_PDR180BT-B_190617_V05_HR.indb 15 17/6/2019 18:46

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Peaq PDR180BT Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info