Bedienungsanleitung Peaq PDR180BT (Seite 17 von 107) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

783290

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

ENGLISH

6. Set alarm schedule with Tune dial and conﬁrm

with Select.

•[Daily] The alarm is activated every day.

•[Weekends] The alarm is activated on Satur-

days and Sundays.

•[Weekdays] The alarm is activated from Mon-

day to Friday.

•[Once][xx-xxxxxx] (Date to be determined)

The alarm is activated only once. The date

must be set.

Note

If [DAB] or [FM] is selected, [last listened] will be

displayed. Press Select to conﬁrm.

7. The volume bar will be displayed. Adjust the

volume with Tune dial and conﬁrm with Select.

8. Switch on/o the alarm [Alarm on/ Alarm o]

with Tune dial and conﬁrm with Select.

9. The alarm settings are stored and [alarm saved]

is displayed.

Activating or deactivating the alarm

1. Follow all the steps in the previous chapter until

point 8.

2. Use the Tune dial to select [Alarm o] to disable

the alarm or [Alarm on] to activate the alarm.

Conﬁrm the selection by pressing Select.

Repeat alarm

When the alarm sounds, press Snooze/Sleep

button to suspend alarm sound for a few minutes.

The alarm will start again after approx. 9 minutes.

Turning o the alarm

When the alarm sounds, press Standby to turn

the alarm o.

Setting the time

1. Select menu option [Time] by turning the Tune

dial and conﬁrm with Select.

2. Use Tune dial to select the desired sub-menu:

• Set 12/24 hour: Choice of 12 or 24 hour

format

• Set Time/Date: manual time and date set-

ting

• Auto update: Choice of DAB Update or No

Update

• Set date format: Choice of DD-MM-YYYY or

MM-DD-YYYY

Set the backlight

Turn the Tune dial to select the [Backlight] menu

item and press Select. You are now in the back-

light menu. Three options are available. Select

options and settings by turning the Tune dial and

conﬁrm your entries by pressing the Select.

• Display o: On, 10-180 sec; On: Display per-

manently on; 10-180 sec: Display switches to

dimmed state after expiration of the preset time.

• On level: High, Medium, Low

• Dim level: High, Medium, Low

Setting the language

Note: The default language is English.

Turn the Tune dial to select the [Language] menu

option and press Select. You are now in the lan-

guage setting menu. Select the desired language

with the Tune dial and conﬁrm the selection by

pressing the Select.

Factory settings

Select menu option [Factory reset] with Tune dial

and conﬁrm with Select.

Displaying the software version

Select menu option [SW version] with Tune dial

and conﬁrm with Select.

Setting the sleep-timer

After a pre-selected amount of time, this unit can

automatically change to standby mode.

1. Push the Snooze/Sleep dial.

2. Use the Tune dial to select the desired options

and conﬁrm by pressing Select:

• [Sleep O]

• [15 minutes]

• [30 minutes]

• [45 minutes]

• [60 minutes]

• [90 minutes]

IM_PDR180BT-B_190617_V05_HR.indb 17 17/6/2019 18:46

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Peaq PDR180BT Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info