21
20
USING YOUR MICROWAVE
Cooking/heating with the speedy
cook button
1. Press the speedy cook button, the display
shows “ :30”. By pressing the button
repeatedly in quick succession the time will
increase by 30 seconds at a time. The time
can be set at 5 minutes maximum. After you
release the button the microwave will start
automatically after 1.5 seconds, with the
maximum power.
2. Press the stop/clear button or open the
door to interrupt the programme.
3. Press the speedy cook button again to
restart the programme.
Cooking/heating with automatic
start time
With the auto start you can programme the
oven to switch on automatically at a preset
time. You can not combine the defrosting
function with auto start. Make sure that the
display shows the correct time before you set
the automatic start time.
1. Set the required cooking/heating program
as described before but do not press the
start button. You can programme up to 2
stages.
2. Press the auto start button. On the display
the auto start indicator light will go on and
“:00” will be visible.
3. Turn the time selection button to set the
minutes of the time you wish to set, for
example 30 minutes. The display will show
“:30”.
4. Press the auto start button again.
5. Turn the time selection button to set the
hours of the time you wish to set, for
example 11 hours. The display will show
“11:30”.
6. Press the start button. The display shows
the normal time and the indicator lights for
the functions you programmed go on. The
auto start indicator light and the colon
between the hours and minutes start
flashing. The microwave oven will start at
the preset time. At the end of the
programme three beeps will sound.The
normal time reappears at the display.
If the oven door is opened after an automatic
start time is set, you will have to press the
start button again to let the normal time
reappear in the display. The oven will then
start at the preset time. To check the
automatic start time when the normal time is
visible, you must press the clock button. The
preset time will then be visible for three
seconds.
GB
USING YOUR MICROWAVE
Cooking/heating in 2 stages
In this mode you can program the oven to
operate on two different power levels during
to different cooking times.
1. Press the power selection button. On the
display, the stage 1 indicator light will go on
and “P-HI” will be visible. Select the
required power level for stage 1 by
repeatedly pressing the power selection
button.
2. Turn the time selection button to set the
required cooking time for stage 1. You can
set the cooking time between 10 seconds
and 59 minutes.
3. Press the power selection button again. On
the display, the stage 2 indicator light will
go on and “P-HI” will be visible. Select the
required power level for stage 2 by
repeatedly pressing the power selection
button.
4. Turn the time selection button to set the
required time for stage 2. You can set the
time between 10 seconds and 59 minutes.
5. Press the start button, to start the
microwave oven. The stage 1 indicator light
will flash to indicate that the oven is
operating in stage 1. The display will show
the resulting time of stage 1. At the end of
stage 1 you will hear a signal and the oven
will switch to stage 2. The stage 2 indicator
light will flash. At the end of stage 2 three
beeps will sound.The normal time
reappears at the display.
Defrosting with weight setting
and cooking heating
In this mode you can defrost a meal before
cooking or heating it.
1. Press the auto defrost button. On the
display the weight defrost indicator light
will go on and the light near the “g” symbol
will flash. The display will show “0”.
2. Turn the time selection button to set the
weight of the food that has to be defrosted.
3. Press the power selection button. On the
display, the stage 1 indicator light will go on
and “P-HI” will be visible. Select the
required power level by repeatedly
pressing the power selection button.
4. Turn the time selection button to set the
required cooking/heating time. If you wish
to cook or heat in 2 stages you can repeat
steps 3 and 4 to set the time and the power
level for the second stage.
5. Press the start button, to start the
microwave oven. The weight defrost
indicator light will flash to indicate that the
oven is defrosting. The display will show
the resulting defrosting time. At the end of
the defrosting you will hear a signal and the
oven will start with cooking/heating
according the stages that you programmed.
At the end of stage 2 three beeps will
sound.The normal time reappears at the
display.
GB
