Bedienungsanleitung PerfectPro Bull1 - Rockbull (Seite 6 von 40) (Deutsch, Englisch, Holländisch, Französisch)

742384

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

7 8

5. Repeat step 1 to 4 for other channels with new stations.

6. Press the MENU button twice to exit manual tuning and return to normal DAB

operation.

Dynamic Range Control (DRC) settings – DAB

DRC can make quieter sounds easier to hear when your radio is used in a noisy

environment.

1. In DAB mode, press the MENU button and rotate the TUNING knob until the display

shows “DRC Value”, then press the TUNING knob.

2. Rotate the TUNINGknobtoselectrequiredDRCsetting(defaultisOFF).

DRC off DRC is switched off, broadcast DRC will be ignored.

DRC high DRC is set as sent by broadcaster.

DRC low DRC level is set to 1/2 that sent by broadcaster.

3. Press the TUNINGknobtoconrmthesetting.Thedisplaywillreturntonormal

radio display.

Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does

not support DRC, then the DRC setting in the radio will have no effect.

Prune stations – DAB

If you move to a different part of the country, some of the stations that were listed

may no longer be available. Also, from time to time, some DAB services may stop

broadcasting, or may change location or frequency. The Prune stations function will

delete the unavailable DAB stations from your station list.

1. In DAB mode, press the MENU button.

2. Rotate the TUNING knob until the display shows “Prune”.

3. Press the TUNING knob to enter the setting.

4. Rotate the TUNINGknobtoselectbetween“Yes”or“No”(defaultisNo).Select“Yes”

to enable this function if required, otherwise, select “No”.

5. Press the TUNINGknobtoconrmyoursetting.Thedisplaywillreturntolastmenu

and press MENU to go to the normal radio display.

Note: If you have moved the radio to a different part of the country, you should also carry

out a search for new stations (please see the section “Finding new stations – DAB”).

FM MODE

Operating the radio – FM seek station

1. Press the On/Off button to switch on the radio.

2. Select the FM RADIO waveband by pressing the SOURCE button.

3. IfthisisthersttimetoswitchtoFMmode,thestationinpreset1willbeplayed.If

the radio has been used before, the last listened station will be played.

4. To seek station, press the TUNINGknob.Thescanstopsautomaticallywhenitnds

 astationofsufcientstrength.

5. After a few seconds, the display will update and show station name if RDS

information is being received.

6. Tondotherstations,presstheTUNING knob again.

7. To seek station in an opposite direction, rotate the TUNING knob clockwise (to scan

 fromlowfrequencytohighfrequency)orrotatetheTUNING knob anti-clockwise (to

 scanfromhighfrequencytolowfrequency),andpresstheTUNING knob.

8. When the waveband end is reached, the radio will recommence tuning from the

opposite waveband end.

Manual tuning – FM

1. Press the On/Off button to switch on the radio.

2. Select the FM band by pressing the SOURCE button.

3. Rotate the TUNING knob to reach the required FM station. The radio will change

the frequency in steps of 50 kHz.

4. Rotate the rubber antenna to get the best reception. If the radio is tuned to a station

 ofsufcientsignalstrengthwithRDSinformationpresent,thedisplaymaychange

to show the station name.

5. When the waveband end is reached, the radio will recommence tuning from the

opposite waveband end.

RDS station service – FM

RDS(RadioDataSystem)isaninformationsystemwhichinaudibledigitalinformation

is transmitted in addition to the normal FM radio program. When the radio is receiving a

RDSstationandthereceptionstrengthissufcient,thestationnamewillappearinthe

display. It may take some time before the RDS information is available.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro Bull1 - Rockbull Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info