Bedienungsanleitung PerfectPro Bull1 - Rockbull (Seite 7 von 40) (Deutsch, Englisch, Holländisch, Französisch)

742384

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

9 10

Calling up RDS information

When you are listening to a FM station with RDS system, repeatedly press the INFO

button to cycle through the information. This will only function if the reception level is

sufcientandclear.

a. Stationname(PS) Displaysthenameofstationbeinglistenedto.

b. Radiotext(RT) Displaysthemessageaboutthestationbeinglistenedtoas

ticker text.

c. Programtype(PTY) Displaysthetypeofstationbeinglistenedto,e.g.Pop,

Classic, News, etc.

d. Frequency Displays the frequency of the station being listened to.

e. Stereo or Mono Displays Stereo or Mono.

f. Signal level Displays the signal strength.

g. Time&date Displaysthecurrenttime(24hourclock)anddate.

Scan sensitivity setting – FM

The radio will normally scan all stations from FM broadcasts including the weaker

signals.However,youmaywishtheAuto-scantondonlythosestationswithstrong

enough signals to give good reception.

1. Press the On/Off button to switch on the radio.

2. Select the FM band by pressing the SOURCE button.

3. Press the MENU button, the display shows “Scan Setting”.

4. Press the TUNING button.

5. Rotate the TUNING knob to select “All Stations” or “Strong Station” (default is “All

 Stations”).The“StrongStation”optionwillallowtheradiotondstrongsignalsonly

when scanning.

6. PresstheTUNINGknobtoconrmyoursetting.Thedisplaywillreturntonormal

radio display.

FM stereo / mono

1. If the FM station being received is weak, some hiss may be audible. To reduce

the hiss, press the Mono/Stereo button to switch to mono mode, the display will

show “Mono”.

2. To return to stereo mode, press the Mono/Stereo button and the display shows

“Stereo”, the radio will switch to stereo mode automatically if the reception is good.

3. “Mono” and “Stereo” can be displayed on the LCD display (See “Calling up RDS

information”above)

PRESET STATIONS

Storing preset stations

There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are

remembered by the radio in the event of a power failure.

1. Press the On/Off button to switch on the radio.

2. Select the desired waveband by pressing the SOURCE button.

3. Tune to the required station.

4. Press and hold the required Preset(1–10)buttonuntiltheradiobeepsandshows

“Saved”.

5. Repeat step 3 and 4 for the remaining presets.

6. Stations stored in the preset memories can be over-written again by following the

above procedures.

Recalling preset stations

1. Press the On/Off button to switch on the radio.

2. Select the desired waveband by pressing the SOURCE button.

3. BrieyPresstherequiredPreset(1-10)button.InFMmodethedisplaywillshow

for example ”P1” on top right hand side.

AUX-IN MODE

A 3.5mm stereo Aux-In socket is provided on the side behind the rubber cover, for

connecting an external audio device such as MP3 player or CD player (Aux cable not

includedwiththisradio).

1. Connect an audio source to the AUX-IN socket.

2. Press the SOURCE button to select AUX input. Display will show “AUX IN”.

3. Play the external player.

4. Adjust the VOLUME of both the radio and the player for comfortable listening.

5. After use, close the rubber cover to prevent moist or dust from entering into the

sockets and radio.

Notes: Never use the Aux-In socket in rainy or moist conditions to prevent moist from

entering the radio. Keep the rubber cover well closed under these conditions.

The Auto-Power management function will be activated in AUX mode. If there is no

signal* from the Aux-In socket for a period of over 15 minutes, the radio will automatically

switch to standby mode. Pressing the On/Off button will wake up the unit.

* Also when the incoming signal from the external device is too low and cannot be

detected for a period of over 15 minutes by the Auto-Power management, the radio will

switch to standby mode.

To prevent this raise the output level of the external device enough to be detected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro Bull1 - Rockbull Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info