Bedienungsanleitung PerfectPro Bull1 - Rockbull (Seite 9 von 40) (Deutsch, Englisch, Holländisch, Französisch)

742384

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

13 14

2. Press the EQUALIZER button repeatedly to select the desired EQ. The displayed

EQ will be effective immediately:

EQ1 Neutral

EQ2 Indoor

EQ3 Outdoor

EQ4 Flat

EQ5 Rock

EQ6 Soul and Jazz

EQ7 Classical

EQ8 Acoustic

EQ9 Dance

EQ10 Spoken word

EQ11 Small room

EQ12 Late night

3. The display will return to normal in 3 seconds, and resume operation.

ADDITIONAL METAL TELESCOPIC ANTENNA

You can use this as an alternative antenna for your radio in areas or locations where the

radiosignal(FM/DAB/DAB+)isweaktoveryweak.

ATTENTION: The standard antenna on the radio is exible. The metal antenna

is not exible or bendable and should be used with care. Breaking or bending

antennas is not covered by warranty.

Installing:Carefullyscrewoffthestandardexibleantenna.Firstcarefullyloosenthe

antennawithanopen-end-wrench(size14)–turncounteranti-clockwise.

Carefully screw on the metal telescopic antenna and softly tighten it with an open-end

wrenchkey(size14)–turnclockwise.

ATTENTION: do not use too much force when xing the antennas as this can

damage the screw threat of the antennas or make it break off.

LANGUAGE SETTING

Themenuoftheradiocanbeconguredtovariouslanguages.

1. Press the On/Off button to switch on the radio.

2. Press the MENU button, and then rotate the TUNING knob until the display shows

“System”.

3. Press the TUNING knob; rotate the TUNING knob until the display shows

“Language”.

4. Press the TUNING knob b to enter the language adjustment menu.

5. Rotate the TUNING knob until the desired language appears on the display (default

 isEnglish).

6. Press the TUNINGknobtoconrmyourchoice.

7. The display menu will then change to the chosen language.

SOFTWARE VERSION

The software display cannot be altered and is just for your reference. You can only view

the software version in DAB and FM modes.

1. Press the On/Off button to switch on the radio.

2. Press the SOURCE button to select FM or DAB mode.

3. Press the MENU button and then rotate the TUNING knob until the display shows

“System”.

4. Press the TUNING knob; rotate the TUNING knob until the display shows “SW

version”.

5. Press the TUNING knob to view the software version.

6. Press the MENU button to return to the normal radio display.

SYSTEM RESET

If the radio fails to operate correctly, or some digits on the display are missing or

incomplete, carry out the following procedure.

1. Press the On/Off button to switch on the radio.

2. Press the MENU button.

3. Rotate the TUNING knob until the display shows “System”. Press the TUNING

knob.

4. Rotate the TUNING knob until the display shows “Factory Reset”. Press the

TUNING knob.

5. Rotate the TUNING knob to select between “Yes” or “No”. Select “Yes” if you wish to

reset the radio, otherwise, select “No”.

6. Press the TUNINGknobtoconrmyourchoice.

7. A full reset will be performed. All presets and the station list will be erased. All

settings will be set to the default values. The radio will start up and the display

will show “WELCOME TO DIGITAL RADIO” for a few seconds. Then the radio will

automatically perform an auto scan of the Band III DAB channels and the FM band.

The display will show “Scanning” in DAB and “Auto” in FM.

8. When the scan is completed, the 10 strongest FM stations will be stored as presets.

The radio will switch to standby with the updated clock and date showing on the

display.

In case of malfunction due to electrostatic discharge; reset the product as above to

resume normal operation. If you are not able to perform the reset operation as above,

reconnect the power supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro Bull1 - Rockbull Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info