Bedienungsanleitung PerfectPro Bull1 - Rockbull (Seite 10 von 40) (Deutsch, Englisch, Holländisch, Französisch)

742384

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

15 16

BACKLIGHT

LCD backlight conguration

1. Press the On/Off button to turn on the radio.

2. Press the MENU button, and then rotate the TUNING knob until the

display shows “System”.

3. Press the TUNING knob; rotate the TUNING knob until the

display shows “LCD backlight”.

4. Press the TUNING knob to enter the LCD backlight adjustment menu.

5. Rotate the TUNING knob to select “on” in order to keep backlight

always lightened when the radio is turned on with AC power supply;

6. Or rotate the TUNINGknobtoselect“off”(bydefault)sothatthe

backlight will be lightened for about 10 seconds whenever a button is pressed

with AC power supply.

7. Press the TUNINGknobtoconrmyourchoice.

RADIO NAME OPTION

This radio supports customization of the radio’s name. If the radio has been named, the

name of the radio will be shown when the radio is turned on and when the radio is turned off.

1. Press the On/Off button to turn on the radio.

2. Press the MENU button, and then rotate the TUNING knob until the display shows

“System”.

3. Press the TUNING knob; rotate the TUNING knob until the display shows “Name”.

Press the TUNING knob.

4. Rotate the TUNING knob to select the letters. The maximum length of new name is

16 letters long.

5. Press the TUNING knobtoconrmthecurrentselection.BypressingthisTUNING

knob, the cursor will be moved to next position for selection.

6. Press the P3 or P4 button to move the cursor to left or right.

7. Repeat step 4 to step 6 to edit the new radio name.

8. To complete editing the new radio name, you can either edit all the 16 letters or

press the MENU button.

9. Whennishingeditingtheradioname,theLCDwilldisplay“Conrmchanges”

 intherstline,anddisplay“OK”tosavethechangesor“Cancel”todiscardthe

changes.

10. Toconrmthechanges,rotatetheTUNING knob until “OK”, and then press the

TUNING knob to exit. After this action, the radio will save the new name.

11. To cancel the changes, rotate the TUNING knob until “Cancel”, and then press the

TUNING knob to exit. After this action, the radio will discard the changes and keep

the current radio name as for display.

12. Whennexttimetheradioisturnedon,theLCDwillshow“Welcome”intherstline

and the new name in the second line.

13. Whentheradioisturnedoff,theLCDwillshow“Goodbye”intherstlineandthe

new name in the second line.

Notes:

- In the name menu, when there is no operation of the panel buttons for more than 20

seconds during editing, the radio will automatically exit the name function without

saving any of the changes.

- The default radio name is empty. The new edited name will be lost and go back to

 default(noname)afterexecutingafactoryresetinthemenu.

- The radio supports maximum 16 letters as the name of the radio.

ATP PASSCODE

ThisradioisequippedwithanAnti-Theft-Protection(ATP)system.WhentheATP

system is enabled, a passcode is required for turning on the radio.

1. Press the On/Off button to turn on the radio.

2. Press the MENU button.

3. Rotate the TUNING knob until the display shows “System”. Press the TUNING

knob.

4. Rotate the TUNING knob until the display shows “Passcode”. Press the TUNING

knob; “Enable” or “Disable” will be displayed. To enable ATP, rotate and press the

TUNING knob to select “Enable”.

5. “Change passcode” will be displayed, enter a 4-digits numeric passcode by pressing

 thepresetbuttons(1-10).

6. “Conrmpasscode”willbedisplayed.Enterasecondtimethesamepasscodeto

 re-conrm.

7. To disable passcode, select “Disable” as previously showed. And re-enter the

previous passcode to disable the lock.

When ATP is enabled, and if wrong passcode is entered for three times, a timer will be

activated. The next attempt will be possible only after the timer has elapsed. The timer

period will be increased with further wrong passcodes.

WARNING: If you choose to activate the passcode, please note your passcode

somewhere safe as a memory back-up in case you should forget it. This as there

is no way to reset the radio should the passcode be forgotten!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro Bull1 - Rockbull Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info