Bedienungsanleitung PerfectPro SD1 - Soliddigital (Seite 6 von 33) (Deutsch, Englisch, Holländisch, Französisch)

742517

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

7 8

2. Rotate the Tuning knob to select the desired channel or Frequency and press the

Tuning knob to tune to the chosen frequency.

3. When DAB stations in the tuned channel are found, the display will show the name

of the station. Any new radio stations found will be added to the list stored in the

radio.

4. Thesignalstrengthdisplayshowsthereceptionofthestation.Theclearunlled

rectangle indicates minimum signal level required for satisfactory reception. The

signal strength bars will go up or down showing the changing signal strength as you

adjust the antenna or the radio position.

5. Repeat step 1 to 4 for other channels with new stations.

6. Press the Menu button twice to exit manual tuning and return to normal DAB

operation.

Dynamic Range Control (DRC) settings – DAB

DRC can make quieter sounds easier to hear when your radio is used in a noisy

environment.

1. In DAB mode, press the Menu button and rotate the Tuning knob until “DRC value”

appears on the display, press the Tuning knob.

2. Rotate the Tuning knob to select required DRC setting (default is OFF).

DRC off DRC is switched off, broadcast DRC will be ignored.

DRC high DRC is set as sent by broadcaster.

DRC low DRC level is set to 1/2 that sent by broadcaster.

3. Press the Tuningtheknobtoconrmthesetting.Thedisplaywillreturntonormal

radio display.

Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does

not support DRC, then the DRC setting in the radio will have no effect.

Prune stations – DAB

If you move to a different area, some of the stations that were listed may no longer be

available. Also, from time to time, some DAB services may stop broadcasting, or may

change location or frequency. The Prune stations function will delete the unavailable

DAB stations from your station list.

1. In DAB mode, press the Menu button.

2. Rotate the Tuning knob until the display shows “Prune”.

3. Press the Tuning knob to enter the setting.

4. Rotate the Tuning knob to select between “Yes” or “No” (default is No). Select “Yes”

to enable this function if required, otherwise, select “No”.

5. PresstheTuningknobtoconrmyoursetting.Thedisplaywillreturntolastmenu

and press menu to go to the normal radio display.

FM RADIO MODE

Operating the radio – FM seek station

1. Press the On/Off button to turn on the radio.

2. Select the FM waveband by pressing the Source button.

3. IfthisisthersttimetoswitchtoFMmode,thestationinpreset1willbeplayed.If

the radio has been used before, the last listened station will be played.

4. To seek a station, press the Tuning knob. The scan stops automatically when it

 ndsastationofsufcientstrength.

5. After a few seconds, the display will update and show station name if RDS

information is being received.

6. Tondotherstations,presstheTuning knob again.

7. To seek station in an opposite direction, rotate the Tuning knob clockwise (to

scan from low frequency to high frequency) or rotate anti-clockwise (to scan from

high frequency to low frequency), and press the Tuning knob.

8. When the waveband end is reached, the radio will recommence tuning from the

opposite waveband end.

Manual tuning – FM

1. Press the On/Off button to turn on the radio.

2. Select the FM band by pressing the Source button.

3. Rotate the Tuning knob to reach the required FM station. The radio will change the

frequency in steps of 50 kHz.

4. Rotate the antenna to get the best reception. If the radio is tuned to a station of

 sufcientsignalstrengthwithRDSinformationpresent,thedisplaymaychangeto

show the station name.

5. When the waveband end is reached, the radio will recommence tuning from the

opposite waveband end.

RDS station service – FM

RDS (Radio Data System) is an information system which inaudible digital information

is transmitted in addition to the normal FM radio program. When the radio is receiving a

RDSstationandthereceptionstrengthissufcient,thestationnamewillappearinthe

display. It may take some time before the RDS information is available.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro SD1 - Soliddigital Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info