Bedienungsanleitung PerfectPro SLIM 1 (Seite 5 von 25) (Deutsch, Englisch, Holländisch, Französisch)

742546

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Manual tuning

1. Press the POWER button to turn on the radio.

2. Select the FM band by pressing the SOURCE button.

3. Rotate the TUNING/SEEK knob to reach the required FM station.

The radio will change the frequency in steps of 50 kHz.

4. Rotate the rubber antenna to get the best reception. If the radio is tuned to a station

 ofsufcientsignalstrengthwithRDSinformationpresent,thedisplaymaychange

to show the station name.

5. When the waveband end is reached, the radio will recommence tuning from the

opposite waveband end.

RDS station service – FM

RDS(RadioDataSystem)isaninformationsystemwhichinaudibledigitalinformationis

transmitted in addition to the normal FM radio programme. When the radio is receiving a

RDSstationandthereceptionstrengthissufcient,thestationnamewillappearinthe

display. It may take some time before the RDS information is available.

Calling up RDS information

When you are listening to a FM station with RDS system, repeatedly press the INFO

button to cycle through the information. This will only function if the reception level is

sufcientandclear.

a.Radiotext(RT) Displaysthemessageaboutthestationbeinglistened

to as ticker text.

b.Programtype(PTY) Displaysthetypeofstationbeinglistenedto,e.g.Pop,

Classic, News, etc.

c. Frequency Displays the frequency of the station being listened to.

d.Time&date Displaysthecurrenttime(24hourclock)anddate.

e. Signal level Displays the signal strength.

PRESET STATIONS

Storing preset stations

There are 5 memory presets in the radio for FM. Presets are remembered by the radio

in the event of a power failure.

1. Press the POWER button to turn on the radio.

2. Press the SOURCE button to select the desired waveband.

3. Tune to the required station.

4. Press and hold the required Preset button and shows for example “P1 Saved”.

5. Repeat step 3 and 4 for the remaining presets.

6. Stations stored in the preset memories can be over-written by following the above

procedure.

Recalling preset stations

1. Press the POWER button to turn on the radio.

2. Press the SOURCE button to select the desired waveband.

3. BrieyPresstherequiredPreset button, the display will show, e.g. "108.00 P1", on

the LCD.

AUX IN MODE

A 3.5mm stereo Aux In socket is provided on the side behind the rubber cover, for

connecting an external audio device such as MP3 player or CD player (not included with

thisradio).

1. Connect an audio SOURCE to the Aux In socket in rare side of the radio.

2. Press the SOURCE button to select AUX input and the AUX icon will be lightened.

3. Play the external player.

4. Adjust the volume of both the radio and the player for comfortable listening.

5. After use, close the rubber cover to prevent moist or dust from entering into the

sockets and radio.

Notes: Never use the AUX-IN socket in rainy or moist conditions to prevent moist from

entering the radio. Keep the rubber cover closed under these conditions.

The Auto-Power management function will be activated in AUX mode. If there is no

signal from the AUX input jack for a period over 15 minutes, the unit will automatically

switch to standby mode. The operation indicator and the LCD will go off in such case.

Pressing the POWER button will wake up the unit.

SETTING THE CLOCK

The clock can only be set when the radio is in standby mode. If no buttons are pressed

for 5 seconds, the radio will exit the clock setup and the setting is cancelled.

1. Press and hold the TUNING/SEEK knobfor12secondsuntilthehourdigitsash

on the display.

2. Rotate the TUNING/SEEK knob to set the hour.

3. Press the TUNING/SEEK knobtoconrm,theminutedigitsash.

4. Rotate the TUNING/SEEK knob to set the minute.

5. Press the TUNING/SEEK knobtoconrm,“CTON”ashes.

6. Rotary the TUNING/SEEK knob to select “CT ON” or “CT OFF”.

7. Press the TUNING/SEEK knobtoconrmandnishtheclocksetting.

RDS time synchronisation

Some RDS stations transmit a time signal. If reception is good and you have selected

the“CTON”optionduringthetimesetting,thetimewillbeautomaticallyupdated(ashes

onthedisplay).Timesynchronisationcantakeseveralminutes.Theautomatictime

setting is always activated when the radio is switched from standby to FM broadcasting

and receives a RDS station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro SLIM 1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info